• Home
  • »
  • Articles
  • »
  • BIS Certification For Fasteners -Threaded Steel Fasteners – Step Bolts For Steel Structure IS 10238:2001

BIS Certification For Fasteners -Threaded Steel Fasteners – Step Bolts For Steel Structure IS 10238:2001


A threaded fastener is a discrete piece of hardware that has internal or external screw threads. It falls into the overall fastener family. They are usually used for the assembly of multiple parts and facilitate disassembly. The most common types are the screw, nut and bolt.

Step bolts feature a wider, lower-profile, round head and are similar to carriage bolts in bearing surface and square-neck design. Step bolts are commonly used in decking applications, or where wood is bolted down because the larger diameter head of the step bolt will not pull through the soft wood. Step bolts may also be called ''pole step”.

The most common types are the screw, nut and bolt. Other more specialized types of threaded fasteners include captive threaded fasteners, stud, threaded inserts, and threaded rods.

BIS is a statutory institution established under the Bureau of Indian Standards Act,1986  to promote harmonious development of the activities of standardization, marking and quality certification of goods and attending to connected matters in the country.

Fasteners – Threaded Steel Fasteners – Step Bolts for Steel Structure product has been specified in IS 10238 : 2001 by Bureau of Indian Standards.

SCOPE

1.1 This standard covers the requirements for step bolt used in steel structures including transmission towers to gain access to the top.

1.2 Each bolt shall be supplied with two hexagon nuts.

Raw Material :

As per clause 5 of IS 10238: 2001 read in conjunction with clause 6, Table 2 of IS 1367 (Part 3): 2017

Possible Tests in a Day :

All Tests

Following are the Testing Parameters :

·       Dimension

·       Material

·       Workmanship

·       Tolerances

·       Thread Requirement

·       Mechanical Properties

o   Tensile Test

o   Proof Load Test

o   Head Soundness Test

o   Yield Strength

o   Strength under wedge loading

o   Hardness test

·       Test

·       Nuts

·       Washers

·       Finish

o   Mass of Coating

o   Uniformity of Coating

o   Adhesion

o   Appearance and Defects

·       Raw Material (Chemical)

·       Surface Discontinuities

 

BIS Certification in India

 

It is always better to consult with experience team such as ERCS Pvt. Ltd. for smooth certification process.

For more information, please feel free to contact us at info@elitasrcs.com or call at +91-9076611770 / +91-9076611766.

Share:

Article Categories

Latest Blogs

Request A Quote

Need Expert Advice?
Feel Free to Connect with Us

Prompt reply within hours
Continued support

Experience Consultants at ERCS are ready to assist you at every step of compliance so as to provide you the best services in India. Get complete information about the certification that your product need to enter in Indian market and build a good consumer base.

Call to ask anything about Compliance

+91-9076611767, +91-9076611766

ERCS Private Limited Logo

Enquiry