BIS Certification for Flexible Pvc Pipes or Polymer Reinforced Thermoplastic Hoses for Suction and Delivery Lines of Agricultural Pumps IS 15265

GET BIS CERTIFICATION FOR FLEXIBLE PVC PIPES OR POLYMER REINFORCED THERMOPLASTIC HOSES FOR SUCTION AND DELIVERY LINES OF AGRICULTURAL PUMPS IS 15265:2003

Flexible polyvinyl chloride, or PVC pipe, is a bendable form of pipe that is ideal for situations where the utilization of rigid pipe is not practical or desirable for some reason. Strong and long-lasting, flexible PVC pipe can be used as part of water systems, for running hookups to washing machines, or as part of a system for ponds and winter gardens.

Thermoplastic hose is built with a high level of contact strength between the layers of core, braid and jacket. This contact is generated because thermoplastic materials can be re-melted during the production process allowing for both a chemical and mechanical bond.

These can be used for suction and delivery lines of agricultural pumps.

BIS is a statutory institution established under the Bureau of Indian Standards Act,1986  to promote harmonious development of the activities of standardization, marking and quality certification of goods and attending to connected matters in the country.

Flexible PVC pipes or polymer reinforced thermoplastic hoses for suction and delivery lines of agricultural pumps  product has been specified in IS 15265:2003 by Bureau of Indian Standards.

SCOPE :

This standard specifies the requirements for flexible PVC pipes or polymer reinforced thermoplastics hoses for suction and delivery lines of agricultural pumps. The hoses covered in this standard are neither intended for use with flammable and combustible materials nor with aromatic solvents.

REFERENCES :

The Indian Standards listed below contain provisions which through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below:

IS 2809 : 1972 Glossary of terms and symbols relating to soil engineering

IS 2810 : 1979 Glossary of terms and symbols relating to soil dynamics

IS 12656 : 1989 Rubber or plastic hoses and tubing - Bending test

RAW MATERIALS :

NA

TESTING PARAMETERS :

·       Materials and Construction

·       Dimensions and Tolerances

·       Hydrostatic test at Standard Atmospheric Condition

·       Hydrostatictestat

·       Pressure Impulse Test

·       Vacuum Test Requirement

·       Control Test for 336h

·       Type test for 4 months

·       Minimum Bend Radius Requirement

·       Cold Bend Radius Requirement

·       Loss of Mass on Heating

·       Effect of Sunlight

·       Effect on Water

POSSIBLE TESTS IN A DAY :

·       Dimensions and Tolerances

·       Hydrostatic Test at Standard Atmospheric Condition

·       Hydrostatic Test

BIS CERTIFICATION IN INDIA

It is always better to consult with experience team such as ERCS Pvt. Ltd. for smooth certification process.

For more information, please feel free to contact us at info@elitasrcs.com or call at +91-9076611770 / +91-9076611766.

Share: