GET BIS CERTIFICATION FOR INTEGRAL WATERPROOFING COMPOUNDS FOR CEMENT MORTAR AND CONCRETE IS 2645:2003

GET BIS CERTIFICATION FOR INTEGRAL WATERPROOFING COMPOUNDS FOR CEMENT MORTAR AND CONCRETE IS 2645:2003

Integral waterproofing uses chemical admixtures, usually a dry powder or liquid added to the concrete mix at the batch plant or the jobsite. Some forms of integral waterproofing will even self-heal minor cracking.

BIS is a statutory institution established under the Bureau of Indian Standards Act,1986  to promote harmonious development of the activities of standardization, marking and quality certification of goods and attending to connected matters in the country.

Integral waterproofing compounds for cement mortar and concrete product has been specified in IS 2645:2003 by Bureau of Indian Standards.

SCOPE :

This standard covers the requirements for integral water proofing compounds for cement mortar and concrete which shall be assessed by:

a) The permeability to water of the specimen made from cement sand mortars, with and without addition of waterproofing compound under test, by measuring the percolation of water through standard specimen cylinders.

b) The physical tests of setting time and compressive strength of cement by admixing the recommended proportions of the mortar/concrete waterproofing compound and comparing the results of similar tests on the same cement without addition of the compound.

Note 1 - Integral waterproofing compounds for mortar and concrete shall be used in such proportions as recommended by manufacturer but not exceeding 3 percent by weight of cement.

Note 2 - For the purpose of all the requirements in this standard, cement shall mean ordinary Portland cement 33 Grade, 43Grade or 53 Grade conforming to IS 269, IS 8112 and IS 12269respectively. By agreement between the purchaser and the supplier, testing of waterproofing compounds may be done with Portland slag cement conforming to IS 455 or Portland pozzolana cement - Fly ash based conforming to IS 1489 : Part 1 or Portland pozzolana cement -Calcined clay based conforming to IS 1489 : Part 2.

REFERENCES

IS 269 : 1989 Ordinary Portland cement, 33Grade - Specification

IS 455 : 1989 Portland slag cement -Specification

IS 650 : 1991 Specification for standard sand for testing of cement

IS 1489 Specification for Portland pozzolana cement:

     Part 1 : 1991 Fly ash based

     Part 2 : 1991 Calcined clay based

IS 1727 : 1967 Methods of test for pozzolanic materials

IS 4031 Methods of physical tests for hydraulic cement:

     Part 5 : 1988 Determination of initial and final setting times

     Part 6 : 1988 Determination of compressive strength of hydraulic cement (other than masonry
     cement)

IS 6925 : 1973 Methods of test for determination of water soluble chlorides in concrete admixtures

IS 8112 : 1989 43 Grade ordinary Portland cement - Specification

IS 12269 : 1987 Specification for 53 Grade ordinary Portland cement

RAW MATERIALS : ---

TESTING PARAMETERS :

·       Permeability to Water (IS 2645)

·       Setting Time (IS 2645, IS 4031 (Part-5))

·       Compressive Strength (IS 2645, IS 4031 (Part-6))

·       Chloride Content (IS 2645, IS 6925)

POSSIBLE TESTS IN A DAY :

·       Setting Time

·       Chloride Content

BIS CERTIFICATION IN INDIA

It is always better to consult with experience team such as ERCS Pvt. Ltd. for smooth certification process.

For more information, please feel free to contact us at info@elitasrcs.com or call at +91-9076611770 / +91-9076611766.

Share: