• Home
  • »
  • Articles
  • »
  • BIS CERTIFICATION FOR SQUARE TINS 15 KG/LITRE FOR GHEE, VANASPATI, EDIBLE OILS AND BAKERY SHORTENINGS IS 10325

BIS CERTIFICATION FOR SQUARE TINS 15 KG/LITRE FOR GHEE, VANASPATI, EDIBLE OILS AND BAKERY SHORTENINGS IS 10325


Square Tins 15 Kg/litre for Ghee, Vanaspati, Edible Oils and Bakery Shortenings IS 10325

GET BIS CERTIFICATION FOR SQUARE TINS - 15 KG/LITRE FOR GHEE, VANASPATI, EDIBLE OILS AND BAKERY SHORTENINGS IS 10325 : 2000

 

Tin is a chemical element, silvery-coloured metal. Tin is soft enough to be cut with little force and a bar of tin can be bent by hand with little effort. When bent, the so-called "tin cry" can be heard as a result of twinning in tin crystals.

Tin boxes are made from tinplate that is steel electro plated with a layer of tin, this makes the tin a printable surface with a bright finish. Tinplate is supplied either on a coil and cut into sheets or is supplied in sheets.

 

BIS is a statutory institution established under the Bureau of Indian Standards Act,1986  to promote harmonious development of the activities of standardization, marking and quality certification of goods and attending to connected matters in the country.

Square Tins - 15 kg/litre For Ghee, Vanaspati, Edible Oils and Bakery Shortenings product has been specified in IS 10325:2000 by Bureau of Indian Standards.

SCOPE :

This standard specifies the requirements for 15 kg/litre square tins used for packing of ghee, vanaspati, edible oils and bakery shortenings (or nitrogen dispersed edible oils).

REFERENCES :

IS 280 :1978 Mild steel wire for general engineering purposes

IS 998 : Part 1 :1983 Methods of chemical analysis of solders(soft and rosin cored):Part 1 Determination of tin antimony

IS 1327 :1988 Method of determination of mass of tin coating on tinplate

IS 1394 :1984 Glossary of terms relating to metal containers

IS 1993 :1993 Single cold-reduced tinplate and single cold-reduced black plate - Electrolytic and hot-dipped tinplate sheet and black plate sheet

IS 2471 :1963 Methods of test for metal containers

IS 3259 :1966 Methods for sampling of metal containers

IS 13954 :1994 Double cold-reduced electrolytic tinplate sheet

 

RAW MATERIAL :

 

This standard specifies definitions relating to general medical terms used in biology, medicine and engineering relevant to surgical implants.

 

TESTING PARAMETERS :

 

·       Material :

o   Thickness of tin plates

o   Coating of tin plate

o   Handle

o   Solder

o   Seating Compound

·       Dimensions and Tolerances :

o   Tin

o   Handle

o   Closure

·       Manufacture

·       Internal and Outside Finish

·       Air Pressure Test

·       Handle Pull Test

·       Hydraulic Pressure Test

 

POSSIBLE TESTS IN A DAY :

·       All Tests

BIS CERTIFICATION IN INDIA

 

It is always better to consult with experience team such as ERCS Pvt. Ltd. for smooth certification process.

For more information, please feel free to contact us at info@elitasrcs.com or call at +91-9076611770 / +91-9076611766.

 

Share:

Article Categories

Latest Blogs

Request A Quote

Need Expert Advice?
Feel Free to Connect with Us

Prompt reply within hours
Continued support

Experience Consultants at ERCS are ready to assist you at every step of compliance so as to provide you the best services in India. Get complete information about the certification that your product need to enter in Indian market and build a good consumer base.

Call to ask anything about Compliance

+91-9076611767, +91-9076611766

ERCS Private Limited Logo

Enquiry