• Home
  • »
  • Articles
  • »
  • BIS CERTIFICATION FOR V-BELTS ENDLESS V-BELTS FOR INDUSTRIAL PURPOSES-GENERAL PURPOSE IS 2494 (Part 1)

BIS CERTIFICATION FOR V-BELTS ENDLESS V-BELTS FOR INDUSTRIAL PURPOSES-GENERAL PURPOSE IS 2494 (Part 1)


GET BIS CERTIFICATION FOR V-BELTS - ENDLESS V-BELTS FOR INDUSTRIAL PURPOSES - GENERAL PURPOSE IS 2494 (Part 1) :1994

 

A v-belt is a flexible and efficient power transmission device capable of transferring power from one shaft to another. It is known for its trapezoidal shape that wedges securely into the sheaves of a shaft.

A V-belt is a composite of different types of rubber, synthetic rubber, and polymers that are combined with reinforcements. In its usual application, a V-belt is subjected to combined tensile and compressive stresses. The top side of a V-belt is subjected to a tensile force directed longitudinally, while the bottom side is compressed due to the compression against the grooves and bending as a belt segment passes the pulley. The surface of the belt needs different types of materials with a high coefficient of friction and increased wear resistance.

 

BIS is a statutory institution established under the Bureau of Indian Standards Act,1986  to promote harmonious development of the activities of standardization, marking and quality certification of goods and attending to connected matters in the country.

V-Belts - Endless V-Belts for Industrial Purposes - General Purpose product has been specified in IS 2494 (Part 1) :1994 by Bureau of Indian Standards.

SCOPE :

This standard (Part 1) covers the dimensions and other requirements of endless V-belts for power transmission in general industrial applications.

1.1 This standard also covers recommendations for transmission capacities and selection procedure for the belts.

1.2 The V-belts conforming to this specification are recommended for operating at ambient temperature between +60�Cand -18�C.

REFERENCES :

 

IS 7923 : 1985 Glossary of terms and definitions relating to drives using V-belts and grooved pulleys

 

RAW MATERIALS :

 

Material – Clause 4 of IS 2494 (Part 1)

 

TESTING PARAMETERS :

 

·       Material and Workmanship

·       Cross Section Dimensions

·       Belt Pitch Length

·       Matched Belts

·       Tensile Test

 

BIS CERTIFICATION IN INDIA

 

It is always better to consult with experience team such as ERCS Pvt. Ltd. for smooth certification process.

For more information, please feel free to contact us at info@elitasrcs.com or call at +91-9076611770 / +91-9076611766.

 

Share:

Article Categories

Latest Blogs

Request A Quote

Need Expert Advice?
Feel Free to Connect with Us

Prompt reply within hours
Continued support

Experience Consultants at ERCS are ready to assist you at every step of compliance so as to provide you the best services in India. Get complete information about the certification that your product need to enter in Indian market and build a good consumer base.

Call to ask anything about Compliance

+91-9076611767, +91-9076611766

ERCS Private Limited Logo

Enquiry