ISI Certification (BIS) for
Electrical Appliances For Stationary Storage Type Electric Water Heaters IS 302 in India

BIS Certification for Stationary Storage Electric Water Heaters

1.  Introduction to Indian Standard IS 302, electrical appliances for stationary storage type electric water heaters.

IS 302 covers electrical appliances for stationary storage type electric water heaters.
This standard has been formulated in a way which directs manufacturers of “stationary storage type electric water heaters” products and specifies the standards for safety and performance requirements for electrical, mechanical, thermal, fire and radiation hazards of stationary storage type electric water heaters.
 
IS 302 specifies the safety and quality parameters or characteristics of the stationary storage type electric water heaters:

Electrical appliances for stationary storage type electric water heaters made up of variety of components like- tank, heating element, thermostat, insulation and safety measures as per the IS 302 part 2/sec 21: 2018. It is designed in a way that is suitable for both residential and similar purposes. The key and core function of this product is to produce hot water below boiling temperature and to store it safely and efficiently.

The components have their own effective and smooth functionalities like- tank is used to store the water for later use, heating element in the form of electric resistance coils helps in heating the water and the moderation of water temperature are controlled by thermostat. For maintaining the water temperature for longer period functions through insulation around the tank which minimizes heat loss and improves energy efficiency and prevent overheating or excessive pressure build-up.

 These products are available in different sizes and capacity and accommodate different hot water uses and providing a convenient and dependable solution for supplying hot water to sinks, showers, and other fixtures.
 

2.      MANDATE FORISI MARK CERTIFICATION FOR ELECTRICAL APPLIANCES FOR STATIONARY STORAGE TYPE ELECTRIC WATER HEATERS IS 302

Under section 14 of Bureau of Indian Standards Act, 1986 (63 of 1986), the Ministry of Commerce and Industry, Department for Promotion of Industry and Internal Trade after consulting the Bureau of Indian Standards has issued the Quality control order.
As per the Quality control order, all the manufacturers of electrical appliances for stationary storage type electric water heaters are obligated to obtain ISI Mark Certification as Obtaining the ISI/BIS Certification is a mandatory requirement for manufacturers of stationary storage type of electric water heaters to sell their products in the Indian market.
 

3.      Types of electrical appliances for stationary storage type electric water heaters IS 302

As per IS 302 stationary type electric water heaters classified as Class I, Class II, or Class III. For safety measures outdoor water heaters must have at least IPX4 protection and while others at least IPX1
 

4.      Procedure to obtain BIS Certification for electrical appliances for stationary storage type electric water heaters IS 302

·       For Indian Manufacturers (Standard Timeframe – 30 days)
·       For Foreign Manufacturers (Standard Timeframe – 180 days)
 

5.       Requisites to get the BIS license for electrical appliances for stationary storage type electric water heaters.

·       Conformity requirement specifications as per IS 302
·        In-house testing laboratory for mandatory tests
·       Competent Quality Control Personnel
·        Adherence to the BIS guidelines for storage type electric water heaters as per Indian standard IS 302
·       There are 4 major categories of document required to get the BIS license:
      a.   Administrative Details
      b.   Technical Details
      c.    Quality Control Personnel Details
      d.   Commercial Details
 

6.      Expenses Involved To obtain BIS certificate For Electrical Appliances Stationary Storage Electric Water Heaters IS 302

 For Indian Manufacturers
No. | Major Charges |   | Amount | Remark
1. | BIS Fee | Application Fees | INR 1000 | To be paid in BIS A/c directly. 20% rebate on Marking Fee for MSME units.
Audit Charges | INR 7000
License Fee | INR 1000
Marking Fee | Not Decided
2. | Testing Charges | Sample Test Fee | As Applicable | To be paid into BIS approved Lab A/c
3. | ERCS Service Fee | Consultancy & others | As per actual, (Depending upon the product and the region of factory)

For the Foreign Manufacturers
No. | Major Charges | Particulars | Amount | Remark
1. | BIS Fee | Application Fees | USD 30 | To be paid into BIS A/c directly in USD (SWIFT). SAARC countries can pay in INR with GST@18%
Audit Charges
(consolidated) | USD 3200 to USD 5900
License Fee | USD 30
Marking Fee | Not Decided  
2. | Testing Charges | Sample Test Fee | As applicable | To be paid into BIS approved Lab A/c
3. | ERCS Service Fee | Consultancy & other charges | As per actual, (Depending upon the product and the location of mfg.)
   
·    In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.
·    For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.
·    Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.
 

7.      Why Choose ERCS Pvt Ltd for stationary storage type electric water heaters?

To get BIS certification and produce a standard quality product, the manufacturer   must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards.
ERCS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.
 
 We have expertise in both-
      BIS certification services for Indian Manufacture
      FMCS BIS Mark Certification for Foreign Manufacturer

·       Scope of work by ERCS Private Limited:

 
A.     Ensuring the conformity of your product as per IS 302:
ERCS Pvt. Ltd. has developed a vast network within the Electrical appliances Industry various BIS departments to assist in ensuring conformity of the product of electrical appliances for stationary storage type electric water heaters according IS 302.

B.     Effective documentation with the awareness of the BIS guidelines:
To facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 150 projects and technically competent acquaintances in various Industries.
We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do reliable and effective documentation of your product in accordance with the BIS guidelines.

C.      A pre-visit can be paid at your factory premises:
In the process of getting BIS certification, the officer from the BIS authority visits the factory for inspection. To get good results, the BIS inspection should go smoothly without any non-conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that the required changes can be adapted to remove the elements of fallibility.

D.     Assistance for BIS audits:
We will explain the whole procedure of conducting a BIS inspection and make you aware of the things which need to be prepared and readily available at the time of inspection.

Benefits of getting ISI Mark for stationary storage electric water heaters to sell in Indian Market

•   The term “ISI mark" means that a certain product conforms to the quality standards set up by the government.
•   It is compulsory for stationary storage type electric water heaters manufacturers to obtain the ISI Mark and the violators are penalized with the material seized and a significant sum as fine.
•  Getting certification improves the probability of your product to survive and compete in the market.
•  Customers have the tendency to buy ISI certified products as it ensures safety and standard quality. Hence, with certified products you can win the confidence and trust of the buyer.
•  With the word of mouth of such a client list, you can establish your credibility in the market.  Hence with renowned brands, you can raise the standard and benchmark the market value of the product.