ISI Certification (BIS) for
Chain Pipe Wrenches IS 4123:1982 in India

Get commercial benefits from the Indian market by being BIS certified for Chain Pipe Wrenches (IS 4123:1982). It implies the product is reliable and safe for the consumer, which becomes a sign of trust for them as the product follows Indian standards. Having a BIS license positively increases access to more markets, enhances brand credibility, and improves sales performance for the manufacturers. All of this is made easy with BIS consultants, who ensure the proper handling of the application process, saving both effort and time. A hassle-free experience is thereby achieved.

Overview Of BIS Certification for Standard Chain Pipe Wrench

Indian Standard IS 4123:1982 specifies the manufacturing, chemical, and physical requirements and testing of Heavy-Duty Chain Wrench.

Here’s the list of parameters or characteristics:

• Size (Nominal Size)
• Chain Length
• Pipe Capacity
• Material
• Jaw Type
• Weight
• Handle Type
• Chain Material
• Standard Compliance
• Operating Temperature
• Finish
• Torque Capacity
• Jaw Opening Range

License is granted to use Standard Mark as per IS 4123:1982 with the following scope:

Name of the product: - Chain Pipe Wrenches Specification  

BIS Certification Process for IS  4123:1982 Standard Chain Pipe Wrench

Learn how to obtain IS 4123:1982-compliant BIS certification. Manufacturers who wish to apply for a BIS accreditation can use the following list:

• Identification of the Product: Go to the list of BIS-required products on the official BIS website. Decide which Indian Standard (IS) is applicable. To make clear which IS standard is suitable for your products
• Registration of Manufacturers: Provide BIS with the name, address, and product details of your production facility.
• Apply for a certificate and provide any necessary documents: test report, process of manufacturing, detailed description of product, etc.
• Test sample: The sample is sent for testing at the laboratory that is accredited by BIS. Tests could be performed outside of a facility accredited by BIS or conducted in-house if you have a laboratory recognized by BIS for this specific type of testing.
• Inspection and Audit: BIS shall inspect and audit your production site to ensure whether the quality control protocols have been followed or not.
• Grant of Certification: Your product will be certified by BIS only if it meets IS standards.
• Surveillance: BIS conducts regular surveillance of the implementing entity to ensure continued compliance.
• Renewal: This certificate is for a period of one to five years. Do not forget to renew your certificate within the stated time.

How long does it take to get certified in BIS?

Once you have applied for BIS certification, you need to know when your products will be certified. The timelines are mentioned below. Let's discuss:

• Indian Manufacturers' BIS Certification (Normal Timeframe: 30 days)
• Certification under BIS FMCS by the overseas companies (which normally takes 180 days)

What BIS License Requirement is needed for Pipe Handling Chain Wrench?

• Requisites to get the BIS license for Industrial Chain Wrench
• Conformity of Raw Material as per IS 4123:1982 
• In-house testing laboratory for mandatory tests
• Competent Quality Control Personnel
• Adherence to the BIS guidelines for Pipe Handling Chain Wrench  as per Indian standard  IS 4123:1982

There are 3 major categories of documents required to get the BIS license:

• Administrative Details
• Technical Details
• Quality Control Personnel Details

BIS Certification Cost for Chain Wrench IS 4123:1982 Under (Scheme-I)

For Indian Manufacturers
No. | Major Charges |   | Amount | Remark
1. | BIS Fee | Application Fees | INR 1000 | To be paid in BIS A/c directly. 20% rebate on Marking Fee for MSME units.
Audit Charges | INR 7000
License Fee | INR 1000
Marking Fee | INR 98000
2. | Testing Charges | Sample Test Fee | Not Defined | To be paid into BIS-approved Lab A/c
3. | ERCS Service Fee | Consultancy & others | As per actual (Depending upon the product and the region of the factory)

For the Foreign Manufacturers
No. | Major Charges | Particulars | Amount | Remark
1. | BIS Fee | Application Fees | USD 30 | To be paid into BIS A/c directly in USD (SWIFT). SAARC countries can pay in INR with GST at 18% 
Audit Charges
  (consolidated) | USD 3200 to USD 5900
License Fee | USD 30
Marking Fee | USD 1170
2. | Testing Charges | Sample Test Fee | As applicable | To be paid into BIS-approved Lab A/c
3. | ERCS Service Fee | Consultancy & other charges | As per actual (Depending upon the product and the location of mfg.)

Product testing is the most crucial step in the BIS certification process since it establishes whether the product's quality satisfies Indian standards. Installation of test equipment for factory internal test laboratories is also an investment in the testing facilities for the above-mentioned reason.

We may further ask for payment or reimbursement of a pre-visit to your factory to ensure that the product meets the relevant Indian Standards and BIS requirements for BIS Certification for Ethenylsulfonyl Ethene.

Advantages of Availing as ISI Mark for Chain Wrench with BIS Consultant

If the "ISI mark" is on the product, then it meets the government's quality standards. Chain Wrench: The specification needs to receive the ISI Mark, and those people who are trading against the specification will face material confiscation and high fines.

It increases the chances that your product will survive and compete in the marketplace. Because ISI-certified products give the customers safety along with standard quality, the buyers will be sure to purchase those products. So, you can count on the faith and confidence of the buyer are present by providing certified products.

The recommendation from this clientele will help you build up your goodwill in the market. You can set a higher standard level along with benchmarking the market value for the product with the name brand.

ERCS Private Limited's role in getting your product certified:

Thus, the above principle becomes an excuse for the manufacturer to get BIS certification and produce a standard quality product. They have to ensure that their product is according to the specified Indian Standard specifications, which we directly interpret from the BIS officials as per the Indian Standards.

ECRS Private Limited will be your friend, philosopher, and guide in the whole process of getting your product certified by the concerned authorities/departments.

Scope of work by ECRS Private Limited:

Ensuring the conformity of your product as per IS  4123:1982

ERCS Pvt. Ltd. has developed a vast network within the cement industry & various BIS departments to assist in ensuring conformity of the product Chain-Type Pipe Wrench. Effective documentation with awareness of the BIS guidelines:

To facilitate the industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 100 projects and various acquaintances in the industry.

We understand the Indian Standard Specifications & BIS guidelines, which we interpret for the Quality Control Personnel, so we can do reliable and effective documentation of your product according to the BIS guidelines.

A pre-visit can be paid for at your factory premises:

In the process of getting BIS certification, the officer from the BIS authority visits the factory for inspection. To get good results, the BIS inspection should go smoothly without any non-conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted to remove the elements of fallibility.

Assistance for BIS audits:

We will explain the whole procedure of conducting a BIS inspection and make you aware of the things that need to be prepared and readily available at the time of inspection.

Similar mandatory products for BIS certification are as below:

• Open Ended Slugging Wrenches (Spanners) - IS 4508:1992
• Ring Slugging Wrenches (Spanners) - IS 4509:1992
• Single-Ended Open-Jaw adjustable wrenches - IS 6149:1984
• Open Jaw Wrenches (Spanners) - IS 2028:2004
• Ring Wrenches (Spanners) - IS 2029:1998
• Pipe Wrenches - General Purpose - IS 4003 (Part 1):1978
• Pipe Wrenches - Heavy Duty - 4003 (Part 2):1986
• Combination Side Cutting Pliers - 3650:1981