ISI Certification (BIS) for
Specification for Combination Side Cutting Pliers IS 3650:1981 in India


Category: ISI Certification (BIS)


Share:



BIS is essential for manufacturers because their products will be assured strictly based on quality and safety aspects. It will hence attract tool industries mostly, where the assurance of a product becomes vital in terms of its quality and performance. For instance, the Edge Cutters IS 3650:1981 manufacturer will increase the reliability of its products by acquiring BIS certification. Such certification will ensure that the product meets the established norms about safety, quality, and performance.


Engaging a BIS consultant is of huge advantage to those manufacturers who want to get certified. A consultant is aware of the applicable standards, acquires all relevant documentation, and guides manufacturers through technical features. Consultants' knowledge helps to avoid costly mistakes and reduce the risk of delay in testing and approval. Compliance tasking also allows manufacturers to focus on production, thus accelerating entry into the market and enabling a stronger competitive advantage.


Overview: Combination Side Cutting Pliers IS 3650


Indian Standard IS 3650:1981 incorporates the production, along with mechanical and chemical specifications, and testing of wrenches. It takes care of whether the products meet Indian standards or not.


QCOs of the Government of India mandate the use of the Standard Mark under a License or CoC. The Department for Promotion of Industry and Internal Trade has issued the Hand Tools (Quality Control) Order, 2024, of the Ministry of Commerce and Industry.


Here's the list of parameters or characteristics on which the products are tested:


  • Material
  • Hardness
  • Cutting Edge Alignment
  • Dimensions
  • Finish
  • Gripping Capacity
  • Corrosion Resistance
  • Cutting Performance
  • Handle Insulation (if applicable)


License Scope: A license is granted for the use of the Standard Mark by IS  3650:1981 for the following products:

  • Product Name: Side Cutting Pliers
  • Type: This category includes heavy-duty side-cutting pliers manufactured according to IS 3650:1981 specifications. Designed for industrial use, these pliers offer excellent cutting efficiency and durability, ensuring reliable performance in high-demand conditions.


BIS Certification Process for IS  3650:1981 (Combination Side Cutting Pliers)


If you are a manufacturer, you must keep the BIS License Process in mind. The process is described briefly below:


  • Identification of the Product: Access the list of BIS-required items by logging into the BIS website.
  • Select IS: To understand what IS is pertinent to the kinds of goods you produce
  • Producer Signing up: Give BIS information about your production facility, such as the name of the company, product information, etc.
  • Submission: Certification Application Submission of necessary papers, such as product information, manufacturing process details, and test reports when applicable, is required.
  • Testing: The BIS sends a sample of your product for testing to an approved laboratory. This could be outside or an in-house laboratory that you may have if approved by the BIS. Alternatively, it may be conducted in an approved laboratory of the BIS.
  • BIS may pay a visit to your production facility to assess adherence to quality controls.
  • Certification Grant: If a product meets the IS standards requirement, BIS will grant certification.
  • Surveillance: BIS regularly conducts surveillance to obtain assurance of ongoing compliance.
  • Renewal: A certification is valid for a period of one to five years. Before the expiration of certification, renewal must be requested.


Timeline of BIS certification of Diagonal Cutting Pliers (IS  3650:1981)


After applying for BIS licensing, it's critical to understand when your items will be certified.


BIS License Requirements for Cable Cutting Pliers


These are the requisites to get the BIS license for the above-mentioned products:

  • Conformity of Raw Material as Per IS  3650:1981
  • In-house testing laboratory for mandatory tests
  • Competent quality control personnel


There are 3 major categories of documents required to get the BIS license for adherence to the BIS guidelines for these pliers with an IS of  3650:1981


  • Administrative Details
  • Technical Details
  • Quality Control Personnel Details


BIS certification cost for Combination Side Cutting Pliers 3650:1981 3650:1981 Under Scheme-I


For Indian Manufacturers
No. | Major Charges |   | Amount | Remark
1. | BIS Fee | Application Fees | INR 1000 | To be paid in BIS A/c directly. 20% rebate on the fee for MSME units.
Audit Charges | INR 7000
License Fee | INR 1000
Marking Fee | INR 57000
2. | Testing Charges | Sample Test Fee | As Applicable | To be paid into BIS-approved Lab A/c
3. | ERCS Service Fee | Consultancy & others | As per actual, (Depending upon the product and the region of the factory)

 

For the Foreign Manufacturers
No. | Major Charges | Particulars | Amount | Remark
1. | BIS Fee | Application Fees | USD 30 | To be paid into BIS A/c directly in USD (SWIFT). SAARC countries can pay in INR with GST at 18% 
Audit Charges
  (consolidated) | USD 3200 to USD 5900
License Fee | USD 30
Marking Fee | USD 670
2. | Testing Charges | Sample Test Fee | As applicable | To be paid into BIS-approved Lab A/c
3. | ERCS Service Fee | Consultancy & other charges | As per actual (Depending upon the product and the location of mfg.)


In the BIS certification process, product testing is the most important stage, as it determines whether the quality of the product meets Indian standards. For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.


Apart from the charges mentioned above in the table, we may ask you to pay/reimburse for a pre-visit at your factory premises to ensure the conformity of your product as per the relevant Indian Standards and BIS guidelines for its BIS certification.


BIS Certification Benefits for Side Cutting Pliers 3650:1981


There are certain benefits of getting ISI Mark for manufactured products; they are: 

  • The term “ISI mark" means that a certain product conforms to the quality standards set up by the government.
  • The product must obtain the ISI Mark, and the violators are penalized with the material seized and a significant sum as a fine.
  • Getting certification improves the probability of your product to survive and compete in the market.
  • Customers tend to buy ISI-certified products as they ensure safety and standard quality. Hence, with certified products, you can win the confidence and trust of the buyer.
  • With the word of mouth of such a client list, you can establish your credibility in the market.
  • Hence, with a renowned brand, you can raise the standard and benchmark the market value of the product.


Role of ERCS Private Limited in getting your product certified:


The manufacturer must make sure that their product complies with the Indian Standard Specifications (ISS), which we translate for you directly from the BIS officials by the Indian Standards, to receive BIS certification and produce a product of standard quality. Throughout the entire process of obtaining your product authorized by the relevant departments or authorities, ECRS Private Limited will be your friend, advisor, and mentor.


Scope of work by ECRS Private Limited:


Make sure your product complies with IS  3650:1981 

To help ensure compliance with IS  3650:1981, ERCS Pvt. Ltd. has established a wide network inside the industry and several BIS departments.


Documentation that is efficient and mindful of the BIS guidelines:

To help the industry get BIS certifications, guidelines have been created. Our staff has completed more than 100 projects and has a variety of industry contacts. We can accurately and efficiently document your product according to the BIS requirements since we comprehend the Indian Standard Specifications and BIS recommendations, which we interpret for the Quality Control Personnel.


You can pay for a pre-visit at your factory:

The officer from the BIS authority inspects the factory as part of the BIS certification process. For the BIS inspection to be successful, there must be no non-conformities. To make the necessary adjustments to eliminate the elements of fallibility, our team will plan a pre-visit to your industrial premises while keeping this objective in mind.


Support for audits of BIS:

We will walk you through the entire BIS inspection process and let you know what needs to be ready and accessible when the inspection takes place.


Similar mandatory products for BIS certification are as below:


Request A Quote

Need Expert Advice?
Feel Free to Connect with Us

Prompt reply within hours
Continued support

Experience Consultants at ERCS are ready to assist you at every step of compliance so as to provide you the best services in India. Get complete information about the certification that your product need to enter in Indian market and build a good consumer base.

Call to ask anything about Compliance

+91-9076611767, +91-9076611766

ERCS Private Limited Logo

Enquiry