ISI Certification (BIS) for
Hot-Dip Galvanized/ Galvannealed Steel Sheet And Strips For Automotive Applications IS 18385: 2023 in India

As a manufacturer, you are bound to face competitive scenarios in your industry. To enhance your sales and establish trust in the Indian market, it is essential to understand how to get BIS certification for Hot-Dip Galvanized/Galvannealed Steel Sheets and Strips for Automotive Applications as per IS 18385:2023. ERCS Private Limited is here to assist you in acquiring a BIS license for your product. Reach out to us today for a free consultation!

Explore the BIS Certification benefits, process, and cost involved in obtaining it, before applying for BIS certification online regarding IS number 18385:2023. The product certification issued by the Bureau of Indian Standards (BIS) ensures that products comply with the specific quality and safety standards set by the Indian government, assuring both consumers and manufacturers that the product meets regulatory standards. Let’s take a closer look at Hot-Dip Galvanized as per IS 18385.

Overview of Hot-Dip Galvanized/ Galvannealed Steel Sheet and Strips BIS Certification

Indian Standard - IS 18385 specifies the manufacturing, chemical, and physical requirements and testing of Hot-Dip Galvanized Steel Sheet and Strips.  Below are the quality parameters or attributes:

 (i) Surface Finish

(ii)  Non-Ageing Characteristics

(iii) Zinc and Zinc alloy Ingots

(iv)  Chemical Composition of base metal

(v)  Ladle Analysis

(vi) Product Analysis

(vii) Mechanical Properties

(viii)  Tensile Test

(ix) Plastic Strain Ratio

(x) Bend Test

(xi) Coating

(xii)  Coating Mass

“Licence is granted to use Standard Mark on Hot-Dip Galvanized/Galvannealed Steel Sheet and Strips for Automotive Applications as per IS 18385: 2023”.

 Type and Designation of Substrate (Steel Grade) |  Classified as given in Table 1 for coated steels withcold substrate and Table 2 for coated steels with hot-rolled substrate.IGC270C, IGC270B………. (Cold Rolled Substrate)IGH270C, IGH290S………..(Hot Rolled Substrate)For zinc-iron alloy (A) product,to be read as “IAC” instead of “IGC” for Cold RolledSubstrateto be read as “IAH” instead of “IGH” for Hot RolledSubstrate 

BIS Certification procedure  For Hot-Dip Galvanized Galvannealed Steel Sheet And Strips

The BIS certification Process consists for IS number IS 18385: 2023 of the following steps:

• Product Identification: Visit the BIS certification website to view a list of products that require certification.

• Select the relevant Indian Standard (IS): Determine the appropriate IS standard for your mandatory product.

• Manufacturer Registration: Submit your manufacturing unit to BIS by providing essential details such as the firm's name, address, and product information.

• Application for certification: To apply for BIS certification, submit the necessary documentation, including product information, manufacturing processes, quality control procedures, and test reports (if applicable).

• Testing: Submit samples for testing to a BIS-approved laboratory. 

• You have two options for testing: Testing can be conducted in-house (if you have a BIS-recognized lab) or at an external BIS-recognized facility. Alternatively, testing can be done at a BIS laboratory.

•  Inspection and Audit: BIS may inspect and audit your manufacturing facility to verify compliance with quality control procedures.

• Certification Grant: BIS will certify your product if it meets the IS standards criteria.

• Surveillance: BIS conducts regular surveillance to ensure continued compliance.

• Renewal: Certification is valid for a specified period, usually ranging from one to five years. Apply for renewal before your certification expires.

What is the Timeline for BIS Certification for Hot Rolled Steel Strip?

The timeline for getting BIS Certification is different for Indian and foreign product manufacturers (FMCS):

• BIS Certification for Indian Manufacturers (Standard Timeframe – 30 days)
• BIS Certification for Foreign Manufacturers (Standard Timeframe – 180 days)

What are the requirements for obtaining BIS product certification as per IS 18385?

Requisites to get the BIS license for Hot-Dip Galvanized Galvannealed Steel Sheets and Strips for Automotive Applications:

• Conformity of Raw Material as per IS 18385: 2023
• In-house testing laboratory for mandatory tests
• Competent Quality Control Personnel

Adherence to the BIS guidelines for Hot-Dip Galvanized/Galvannealed Steel Sheet and Strips for Automotive Applications as per Indian standard IS 18385: 2023. There are 3 major categories of documents required to get the BIS license:

• Administrative Details
• Technical Details
• Quality Control Personnel Details

BIS Certification Cost for Hot-Dip Galvanized/Galvannealed Steel Sheets

Expenses involved in obtaining a BIS certificate under  BIS standard Scheme-I:

For Indian Manufacturers
No. | Major Charges |   | Amount | Remark
1. | BIS Fee | Application Fees | INR 1000 | To be paid in BIS A/c directly. 20% rebate on Marking Fee for MSME units.
Audit Charges | INR 7000
License Fee | INR 1000
Marking Fee | INR 77000
2. | Testing Charges | Sample Test Fee | As Applicable | To be paid into BIS-approved Lab A/c
3. | ERCS Service Fee | Consultancy & others | As per actual, (Depending upon the product and the region of a factory)

For the Foreign Manufacturers
No. | Major Charges | Particulars | Amount | Remark
1. | BIS Fee | Application Fees | USD 30 | To be paid into BIS A/c directly in USD (SWIFT). SAARC countries can pay in INR with GST@18% 
Audit Charges
 (consolidated) | USD 3200 to USD 5900
License Fee | USD 30
Marking Fee | USD 920
2. | Testing Charges | Sample Test Fee | As applicable | To be paid into BIS-approved Lab A/c
3. | ERCS Service Fee | Consultancy & other charges | As per actual, (Depending upon the product and the location of mfg.)

In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards. For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories. Apart from the charges mentioned above in the table, we may ask you to pay/reimburse for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for BIS certification.

Benefits of BIS Certification for Hot-Dip Galvanized Galvannealed Steel Sheet IS 18385

Getting ISI Mark for Hot-Dip Galvanized/Galvannealed Steel Sheet and Strips for Automotive Applications to sell in the Indian Market with our support involves the following benefits:

• The term “ISI mark" means that a certain product conforms to the quality standards set up by the government.
• It is compulsory for Hot-Dip Galvanized/Galvannealed Steel Sheet and Strips for Automotive Applications to obtain the ISI Mark and the violators are penalized with the material seized and a significant sum as a fine.
• Getting certification improves the probability of your product to survive and compete in the market.
• Customers tend to buy ISI-certified products as they ensure safety and standard quality. Hence, with certified products, you can win the confidence and trust of the buyer.
• With the word of mouth of such a consumer list, you can establish your credibility in the market.
• Hence with the renowned brand, you can raise the standard and benchmark the market value of the product.

Role of ERCS Private Limited in getting your product BIS certified:

To produce a standard quality product and obtain BIS certification, the manufacturers must ensure that their product follows the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards.

ECRS Private Limited will be acting as your guidance counselor in the process of getting your product certified by the concerned BIS authorities/ departments.

Scope of work by ECRS Private Limited:

• Ensuring the conformity of your product as per IS 18385 : 2023:

ERCS Pvt. Ltd. has developed a vast network within the Steel Industry & various BIS departments to assist in ensuring conformity of the product - Hot-Dip Galvanized/Galvannealed Steel Sheet and Strips for Automotive Applications according to IS 18385: 2023. 

• Effective documentation with the awareness of the BIS guidelines:

To facilitate the industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 100 projects and various acquaintances in the Industry. We understand the Indian Standard Specifications & BIS guidelines which we interpret to the Quality Control Personnel so we can do a reliable and effective documentation of your product by the BIS guidelines.

• A pre-visit can paid for at your factory premises:

In the process of getting BIS certification, the officer from the BIS authority visits the factory for inspection. To get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted so as to remove the elements of fallibility.

• Assistance for BIS audits:

We will explain the whole procedure of conducting a BIS inspection and make you aware of the things that need to be prepared and readily available at the time of inspection.

Similar Mandatory Products for BIS Certification are as bellow:

Here is the list of similar BIS Mandatory products:

• BIS Certification for Hot Dip Zinc Coating on Structural Steel Bars - IS 12594
• BIS certification for Hot Dip Galvanized Stay Strand - IS 2141
• BIS Certification for Hot-Dip Terne Coated Carbon Steel Sheets - IS 12313:1988
• BIS Certification for Hot Dip Aluminium- Zinc Alloy Metallic Coated Steel Strip and Sheet IS 15961:2012
• BIS Certification for Hot Rolled Steel Strip, Sheet, and Plates for Welded Steel Pipe for Pipeline Transportation Systems -  IS 18384