ISI Certification (BIS) for
Pipe Wrenches of General Purpose IS 4003 (Part 1): 1978 in India


Category: ISI Certification (BIS)


Share:



The Bureau of Indian Standards (BIS) is of great significance to any manufacturer who wants to be sure of having quality products and standards compliance. BIS certification gives the consumer a guarantee that the product embodies safety, quality, and performance standards. Having this certification increases the credibility of the brand while erasing any legal issues connected with the company. It also enables the manufacturer to always be on the right side of the regulatory framework that governs their products. Following these standards can help companies enjoy a competitive edge, especially in those that are in high-demand industries such as quality and safety.


A BIS consultant can become a goldmine to guide manufacturers through this thorny certification process. They analyze the standard requirements for a particular product, draft and arrange needed documents, and accompany the client to ensure all technical requirements are satisfied. With their expertise, consultants facilitate the application and testing procedures with the least amount of delay and expensive mistakes. With their expert guidance and completion of compliance tasks, consultants give manufacturers the freedom to start production and enter the market, thereby accelerating time to market and increasing competitiveness. Let us discuss this in detail.


An Overview of BIS certification for Universal pipe wrenches with an  IS 4003 (Part 1): 1978


Indian Standard IS 4003 (Part 1): 1978  incorporates the production, along with mechanical and chemical specifications, and testing of wrenches. It takes care of whether the products meet Indian standards or not.


QCOs of the Government of India mandate the use of the Standard Mark under a License or CoC. The Department for Promotion of Industry and Internal Trade has issued the Hand Tools QCO (Quality Control) Order, 2024, of the Ministry of Commerce and Industry.


Here's the list of parameters or characteristics on which the products are tested:

  • Dimensional Accuracy
  • Material Composition
  • Mechanical Properties
  • Surface Finish
  • Hardness
  • Functional Performance
  • Strength and Durability
  • Tensile Properties
  • Resistance to Corrosion
  • Load-Bearing Capacity


License Scope: A license is granted for the use of the Standard Mark by IS 4003 (Part 1): 1978 for the following products:


  • Product Name: Pipe Wrenches of General Purpose for Industrial Use
  • Type: Pipe wrenches of various sizes and specifications as per the requirements outlined in IS 4003 (Part 1): 1978, designed for general industrial applications.


BIS Certification Process for  Versatile Pipe Wrenches IS  4003 (Part 1): 1978


If you are a manufacturer, you must keep the procedure for BIS certification in mind. The process is described briefly below:

  • Identification of the Product: Access the list of BIS-required items by logging into the BIS website.
  • Select IS: To understand what IS is pertinent to the kinds of goods you produce
  • Producer Signing up: Give BIS information about your production facility, such as the name of the company, product information, etc.
  • Submission: Certification Application Submission of necessary papers, such as product information, manufacturing process details, and test reports when applicable, is required.
  • Testing: The BIS sends a sample of your product for testing to an approved laboratory. This could be outside or an in-house laboratory that you may have if approved by the BIS. Alternatively, it may be conducted in an approved laboratory of the BIS.
  • BIS may pay a visit to your production facility to assess adherence to quality controls.
  • Certification Grant: If a product meets the IS standards requirement, BIS will grant certification.
  • Surveillance: BIS regularly conducts surveillance to obtain assurance of ongoing compliance.
  • Renewal: A certification is valid for a period of one to five years. Before the expiration of certification, renewal must be requested.


Timeline of BIS certification of Wrenches IS 4003: 1978 Part 1


After applying for BIS certification, it's critical to understand when your items will be certified.


BIS License Requirements for All-Purpose Pipe Wrenches


These are the requisites to get the BIS license for the above-mentioned products:


  • Conformity of Raw Material as Per IS 4003 (Part 1): 1978
  • In-house testing laboratory for mandatory tests
  • Competent quality control personnel


There are 3 major categories of documents required to get the BIS license for adherence to the BIS guidelines for Multi-use pipe wrenches  with an IS of  4003 (Part 1): 1978


  • Administrative Details
  • Technical Details
  • Quality Control Personnel Details


BIS Certification Cost for Pipe Wrenches of General Purpose IS 4003 Part 1: 1978 Under Scheme-I:


For Indian Manufacturers
No. | Major Charges |   | Amount | Remark
1. | BIS Fee | Application Fees | INR 1000 | To be paid in BIS A/c directly. 20% rebate on the Fee for MSME units.
Audit Charges | INR 7000
License Fee | INR 1000
Marking Fee | INR 57000
2. | Testing Charges | Sample Test Fee | As Applicable | To be paid into BIS-approved Lab A/c
3. | ERCS Service Fee | Consultancy & others | As per actual, (Depending upon the product and the region of the factory)

 

For the Foreign Manufacturers
No. | Major Charges | Particulars | Amount | Remark
1. | BIS Fee | Application Fees | USD 30 | To be paid into BIS A/c directly in USD (SWIFT). SAARC countries can pay in INR with GST@18% 
Audit Charges
  (consolidated) | USD 3200 to USD 5900
License Fee | USD 30
Marking Fee | USD 670
2. | Testing Charges | Sample Test Fee | As applicable | To be paid into BIS-approved Lab A/c
3. | ERCS Service Fee | Consultancy & other charges | As per actual, (Depending upon the product and the location of mfg.)


The most crucial step in the BIS certification procedure is product testing, which establishes whether the product's quality satisfies Indian standards. The installation of test equipment for internal factory test laboratories necessitates investments in testing facilities.


We may request payment or reimbursement for a pre-visit at your production premises in addition to the fees listed above in the table. This will confirm that your product complies with the applicable Indian Standards and BIS requirements for its BIS certification.


BIS Certification Benefits for General Use Wrenches


The following are some advantages of having your manufactured goods certified by ISI:

  • "ISI mark" indicates that a product satisfies government-established quality standards.
  • The product needs to have the ISI Mark Certification and those who don't have it face having their materials seized and paying a hefty fee.
  • Obtaining certification increases your product's chances of surviving and competing in the market.
  • ISI-certified products are typically purchased by customers because they guarantee standard quality and safety. Therefore, by using approved products, you can gain the buyer's trust and confidence.
  • Your credibility in the market can be established through the word-of-mouth of such a client list. 
  • Hence, with a renowned brand, you can raise the standard and benchmark the market value of the product


Role of ERCS Private Limited in Getting your Product Certified:

The key benefits of opting for ERCS Private Limited:


ERCS Private Limited's function in obtaining certification for your product:

The manufacturer needs to ensure their product meets the Indian Standard Specifications (ISS) to earn BIS certification for producing high-quality products, as translated directly from BIS officials by the Indian Standards. ECRS Private Limited will support, guide, and coach you through the entire process of getting your product approved by the appropriate departments or authorities.


The work that ECRS Private Limited is doing:

Verify that your product conforms with IS. Wrenches that comply with IS 4003 (Part 1): 1978 are made possible by ERCS Pvt. Ltd.'s extensive industrial and BIS department network.


Effective documentation that complies with BIS guidelines:

To help the industry get BIS certifications, guidelines have been created. Our staff has completed more than 100 projects and has a variety of industry contacts. We can accurately and efficiently document your product according to the BIS requirements since we comprehend the Indian Standard Specifications and BIS recommendations, which we interpret for the Quality Control Personnel.


A pre-visit to your factory can be paid for:

The process of BIS certification involves a factory inspection conducted by a regulatory officer. For the BIS inspection to succeed, non-conformities must be absent. Our team will schedule a preliminary visit to your industrial facility to make necessary changes and reduce potential risks.


Assistance with BIS audits:

We will guide you through every step of the BIS inspection procedure and inform you of the preparations and resources that must be available for the inspection.


Similar mandatory products for BIS certification are as below:


Request A Quote

Need Expert Advice?
Feel Free to Connect with Us

Prompt reply within hours
Continued support

Experience Consultants at ERCS are ready to assist you at every step of compliance so as to provide you the best services in India. Get complete information about the certification that your product need to enter in Indian market and build a good consumer base.

Call to ask anything about Compliance

+91-9076611767, +91-9076611766

ERCS Private Limited Logo