ISI Certification (BIS) for
Ring Slugging Wrenches (Spanners) IS 4509:1992 in India


Category: ISI Certification (BIS)


Share:



BIS certification to IS 4509:1992 is essential for manufacturers of Ring Slugging Wrenches (Spanners). Without such a certificate, it would be impossible to compete in the Indian market, where purchasers demand an assurance that the products fulfill the quality and safety requirements established. This ISI mark ensures that your products are based on rigid Indian standards, making sure the buyers that the products they buy are reliable and fulfill the national requirement, thereby making your offerings special in the competition.


Having a  BIS license from the Bureau of Indian Standards will greatly enhance your production and sales potential. Now, you either apply for this license yourself or else seek an expert consultant in India who may make this process smooth-trotted. The benefits of earning the ISI Mark Certification comprise high-quality products and growing market credibility. This can be a great asset to your business. Let's move on to how a BIS consultant can help your products be BIS certified.


General view of BIS certification for Ring Impact Wrenches with an  IS 4509:1992


Indian Standard IS 4509:1992 incorporates the production, along with mechanical and chemical specifications, and testing of wrenches. It takes care of the fact whether the products are as per Indian standards or not.


The Government of India issues the Quality Control Orders (QCOs) mandating the use of the Standard Mark under a License or Certificate of Conformity (CoC). The Hand Tools (Quality Control) Order, 2024, was issued by the Ministry of Commerce and Industry Department for the Promotion of Industry and Internal Trade.


Here's the list of parameters or characteristics on which the products are tested:


  • Dimensional Accuracy
  • Material Composition
  • Mechanical Properties
  • Surface Finish
  • Hardness
  • Functional Performance
  • Strength and Durability
  • Tensile Properties
  • Resistance to Corrosion
  • Load-Bearing Capacity


License Scope: A license is issued to use the Standard Mark as per IS 4509:1992 for the following products:


  • Name of the Product: Ring slugging wrenches (spanners) intended for industrial use.
  • Type: Ring slugging wrenches of various sizes and specifications as per the requirements outlined in IS 4509:1992.

BIS Certification Process for IS  4509:1992 (Ring Wrenches)

If you are a manufacturer, you must keep the BIS Certification Process in mind. The process is described briefly below:

  • Identification of the Product: Access the list of BIS-required items by logging into the BIS website.
  • Select IS: To understand what IS is pertinent to the kinds of goods you produce
  • Producer Signing up: Give BIS information about your production facility, such as the name of the company, product information, etc.
  • Submission: Certification Application Submission of necessary papers, such as product information, manufacturing process details, and test reports when applicable, is required.
  • Testing: A sample of the product is sent to a BIS-approved laboratory for testing. You can do the testing at an outside facility or in-house if you have a laboratory that is approved by the BIS. As an alternative, a BIS laboratory might be used.
  • BIS may pay a visit to your production facility to assess adherence to quality controls.
  • Certification Grant: If a product meets the IS standards requirement, BIS will grant certification.
  • Surveillance: BIS regularly conducts surveillance to obtain assurance of ongoing compliance.
  • Renewal: A certification is valid for a period of one to five years. Before the expiration of certification, renewal must be requested.


Timeline of BIS certification of Slugging Spanners (IS 4509:1992)


After applying for BIS certification, it's critical to understand when your items will be certified:

  • BIS certification for Indian manufacturers (standard timeframe: 30 days)
  • BIS certification for foreign manufacturers FMCS (standard timeframe: 180 days)


BIS license requirements for Heavy-Duty Wrenches


These are the requisites to get the BIS license for the above-mentioned products:


  • Conformity of Raw Material as Per IS 4509:1992
  • In-house testing laboratory for mandatory tests
  • Competent quality control personnel


There are 3 major categories of documents required to get the BIS license for adherence to the BIS guidelines for Slotted Wrenches with an IS of 4509:1992


  • Administrative Details
  • Technical Details
  • Quality Control Personnel Details


BIS Certification Cost for Ring Slugging Wrenches (Spanners) IS 4509:1992 under Scheme-I


For Indian Manufacturers
No. | Major Charges |   | Amount | Remark
1. | BIS Fee | Application Fees | INR 1000 | To be paid in BIS A/c directly. 20% rebate on Marking Fee for MSME units.
Audit Charges | INR 7000
License Fee | INR 1000
Marking Fee | INR 57000
2. | Testing Charges | Sample Test Fee | As Applicable | To be paid into BIS-approved Lab A/c
3. | ERCS Service Fee | Consultancy & others | As per actual, (Depending upon the product and the region of the factory)

 

For the Foreign Manufacturers
No. | Major Charges | Particulars | Amount | Remark
1. | BIS Fee | Application Fees | USD 30 | To be paid into BIS A/c directly in USD (SWIFT). SAARC countries can pay in INR with GST@18% 
Audit Charges
(consolidated) | USD 3200 to USD 5900
License Fee | USD 30
Marking Fee | USD 670
2. | Testing Charges | Sample Test Fee | As applicable | To be paid into BIS-approved Lab A/c
3. | ERCS Service Fee | Consultancy & other charges | As per actual, (Depending upon the product and the location of mfg.)



In the BIS certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards. For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.


Apart from the charges mentioned above in the table, we may ask you to pay/reimburse for a pre-visit at your factory premises to ensure the conformity of your product as per the relevant Indian Standards and BIS guidelines for its BIS certification.


BIS Certification Benefits for Industrial Spanners


There are certain benefits of getting ISI Mark for your manufactured products; they are:


  • The term “ISI mark" means that a certain product conforms to the quality standards set up by the government.
  • The product must obtain the ISI Mark, and the violators are penalized with the material seized and a significant sum as a fine.
  • Getting certification improves the probability of your product to survive and compete in the market.
  • Customers tend to buy ISI-certified products as they ensure safety and standard quality. Hence, with certified products, you can win the confidence and trust of the buyer.
  • With the word of mouth of such a client list, you can establish your credibility in the market.
  • Hence, with a renowned brand, you can raise the standard and benchmark the market value of the product


Role of ERCS Private Limited in getting your product Certified:


The manufacturer must make sure that their product complies with the Indian Standard Specifications (ISS), which we translate for you directly from the BIS officials by the Indian Standards, to receive BIS certification and produce a product of standard quality. Throughout the entire process of obtaining your product authorized by the relevant departments or authorities, ECRS Private Limited will be your friend, advisor, and mentor.


Scope of work by ECRS Private Limited:


Make sure your product complies with IS 4509:1992

To help ensure that spanners with IS 4509:1992, ERCS Pvt. Ltd. has established a wide network inside the industry and several BIS departments.


Documentation that is efficient and mindful of the BIS guidelines:

To help the industry get BIS certifications, guidelines have been created. Our staff has completed more than 100 projects and has a variety of industry contacts. We can accurately and efficiently document your product according to the BIS requirements since we comprehend the Indian Standard Specifications and BIS recommendations, which we interpret for the Quality Control Personnel.


You can pay for a pre-visit at your factory:

The officer from the BIS authority inspects the factory as part of the BIS certification process. For the BIS inspection to be successful, there must be no non-conformities. To make the necessary adjustments to eliminate the elements of fallibility, our team will plan a pre-visit to your industrial premises while keeping this objective in mind.


Support for audits of BIS:

We will walk you through the entire BIS inspection process and let you know what needs to be ready and accessible when the inspection takes place.


Similar mandatory products for BIS certification are as below:

  1. BIS Certification for Chain Pipe Wrenches - IS 4123:1982
  2. BIS Certification for Open Ended Slugging Wrenches (Spanners) - IS 4508:1992
  3. BIS Certification for Single-Ended Open-Jaw adjustable wrenches - IS 6149:1984
  4. BIS Certification for Open Jaw Wrenches (Spanners) - IS 2028:2004
  5. BIS Certification for Ring Wrenches (Spanners) - IS 2029:1998
  6. Pipe Wrenches - General Purpose - IS 4003 (Part 1):1978
  7. Pipe Wrenches - Heavy Duty - IS 4003 (Part 2):1986
  8. Combination Side Cutting Pliers - IS 3650:1981
Request A Quote

Need Expert Advice?
Feel Free to Connect with Us

Prompt reply within hours
Continued support

Experience Consultants at ERCS are ready to assist you at every step of compliance so as to provide you the best services in India. Get complete information about the certification that your product need to enter in Indian market and build a good consumer base.

Call to ask anything about Compliance

+91-9076611767, +91-9076611766

ERCS Private Limited Logo