ISI Certification (BIS) for
Solar Flat Plate Collector for Solar Water Heating Systems IS 12933 (Part 1): 2003 in India
The BIS mark under IS 12933 (Part 1): 2003 represents ISI mark certification Requirements for Solar Flat Plate Collectors. It is vital because it would ensure adherence to the quality and performance standards laid down by BIS, thus guaranteeing reliability, durability, and efficiency on the part of the solar collectors so that consumers could have confidence in their energy-saving potential. The ISI mark also helps manufacturers comply with national regulations, providing safety and ensuring the solar water heating system is practiced sustainably for both residential and industrial use.
The product comes under Scheme 1 certification, and it also helps manufacturers grow their businesses by assuring the customers of good product quality and compliance with national standards through the ISI mark for IS 12933 Part 1: 2003. This means improvement in credibility and trust in the marketplace, helping the manufacturers to differentiate their products from those of other competitors. The BIS mark opens new business streams as government authorities, industries, and consumers accept it. It also creates an image of reliability precursor to repeat businesses and a greater market reach, enhancing the growth and sustainability of the corporation.
BIS QCO (Quality Control Order) for Solar Water Heating Systems
The Solar Thermal Systems, Devices, and Components (Quality Control) Order, 2024, shall specify such goods for which the Bureau of Indian Standards shall be the certifying and enforcing authority. BIS or other agencies designated by it shall conduct market surveillance in consultation with the Ministry of New and Renewable Energy to ensure conformance to the relevant Indian Standards for products bearing the Standard Mark. Any violation of this order shall attract penalties under Section 29(3) of the Bureau of Indian Standards Act, 2016, ensuring compliance and maintaining product quality in the solar thermal sector.
Prerequisites for Solar Flat Plate Collector for Solar Water Heating Systems
These are some parameters on which Indian Standards IS 12933 (Part 1): 2003 can be tested for certification:
- Thermal Performance
- Heat Loss
- Durability and Resistance
- Insulation Properties
- Material Quality
- Structural Integrity
- Flow Characteristics
- Pressure Resistance
The process of acquiring an ISI Mark License for Solar Water Heating Systems IS 12933 (Part 1): 2003. Below is the procedure for certifying your product under the Bureau of Indian Standards:
1. Apply to the online portal.
2. furnishing of factory registration, quality control plans, and details of processes.
3. The factory is inspected to check for conformity with IS 12933 (Part 1): 2003.
4. Samples are sent to a test lab approved by BIS for testing.
5. The inspection and test results are reviewed by BIS; if it is compliant, approval is issued.
6. An ISI Mark license is issued.
7. Maintain compliance through regular audits and inspections.
8. Keep on renewing the license periodically by providing relevant documents along with fees.
Timeline for BIS License for Solar Flat Plate Collector IS 12933 Part-1
Different BIS certification schedules are available in India for different producer categories. They are:
- Indian Manufacturers' BIS Certification (usually within 30 days)
- BIS Certification for Foreign Manufacturers (Usually 180 Days)
Requirements for Obtaining BIS license under Indian Standard 12933 Part 1
There are several ways to obtain a BIS license for IS 12933 (Part 1): 2003, also known as the Indian Standard for Solar Flat Plate Collector. They are:
1. Create an account with BIS: Register via the web portal to receive BIS services.
2 Application filing: It should contain all the information about the production unit, product, and producer.
3. Documents uploaded: Enclose the application form with the factory registration, raw material test reports, process flow charts, and quality control plans.
4. Cover the application cost: Use the portal to submit the cost for further processing.
5. BIS officers' inspection: Arrange for a factory inspection to evaluate the quality control and manufacturing processes.
6. Sample testing: To comply with IS IS 12933 (Part 1): 2003, submit product samples for examination at a laboratory that has been approved by BIS.
7. Report review: BIS checks the test and inspection results to make sure they meet the requirements.
8. License: BIS grants permission to apply the Standard Mark to the article upon appropriate compliance.
9. Responsibilities after licensing: Preserve the quality of the product, permit audits, and renew the license regularly.
BIS Certification Fee for Solar Flat Plate Collector
An extensive breakdown of the expenses related to ISI certification for Indian Standard can be seen below:
S No. | Particular | Amount (INR) | Remarks
1. | Application Fee | 1000 | To be paid directly to BIS
2. | Audit Fee | 7000 | To be paid directly to BIS
3. | License Fee | 1000 | To be paid directly to BIS
4. | Sample Testing Fee | As Applicable | To be paid directly to BIS ( Testing charges vary from product to product and lab to lab)
5. | Minimum Advance Marking Fee | As per actual | To be paid directly to BIS (Marking fee vary as per Indian Standard)
6. | Renewal Fee | 1000 | To be paid directly to BIS
7. | Inclusion Fee | 5000 | To be paid directly to BIS
8. | ERCS Service Fee | Please Contact info@elitasrcs.com |
Product testing, which establishes if the product's quality satisfies Indian standards, is the most crucial step in the BIS certification process. The same justifies the need to spend in testing facilities to set up internal manufacturing test laboratories with test equipment.
In addition to the fees listed in the above table, we could ask you to pay for a pre-visit at your factory to make sure your product satisfies the necessary BIS and Indian Standards for its BIS certification.
BIS Certification Benefits for Solar Flat Plate Collector
Let's talk about the main advantages of having a BIS certification. Below are some points to consider:
1. Quality assurance that the steel satisfies the essentials of the Indian standard for structural quality will be provided to both customers and regulatory bodies. It would prove that this product has completed extensive testing and inspections.
2. Greater market acceptance: Many companies favour products with an ISI certificate. Many government tenders for major construction projects demand materials with an ISI accreditation, which increases the possibility for the company.
3. Adherence to standard regulations: The ISI certification ensures that IS 12933 (Part 1): 2003 is followed and shields any company from penalties and legal problems brought on by the use of inferior building materials.
4. Competitive Advantage: By differentiating companies and eventually attracting more clients, the ISI mark acts as a nationwide emblem of excellence and reliability.
5. Consumer Confidence: Customers trust the ISI mark as a symbol of reliability, quality, and safety, which improves the brand's reputation and increases customer loyalty.
6. Reduced Risk and liability: When certification lowers the possibility of structural failures or non-compliance issues, manufacturers, suppliers, and end users are less worried about liability.
7. Production Cost Efficiency: Manufacturing is made considerably more efficient by IS IS 12933 (Part 1): 2003 which sometimes results in less waste and more efficiency. Long-term costs will be reduced as a result.
Thus, getting the ISI mark for the IS IS 12933 (Part 1): 2003 certificate can help with safer structural applications, business growth, and customer satisfaction.
The role ERCS Private Limited played in getting your product approved by the BIS
The manufacturer must make sure that their product complies with the Indian Standard Specifications (ISS), which we translate for you directly from the BIS authorities in accordance with the Indian Standards, in order to receive BIS certification and produce a product of standard quality.
1. Appropriate Documentation: ERCS ensures that your product complies with the necessary IS requirements. The team guarantees that the product documentation will adhere to BIS criteria by intimately understanding the Indian Standard Specifications and BIS suggestions. These requirements are interpreted for Quality Control Personnel by staff members who have completed over 100 projects.
2. Pre-Visit Factory Inspection: To guarantee a seamless BIS inspection, ERCS provides pre-visit planning. To find and address any possible nonconformities, the team conducts an initial inspection of your factory. This increases the effectiveness of the BIS inspection procedure and contributes to successful outcomes.
3. Support for BIS Audits: The entire BIS inspection procedure is thoroughly described at ERCS so that everyone is aware of what to bring to the inspection. For an audit to be successful, the team makes sure that the necessary paperwork and protocols are available.
Similar Products List ofSolar Thermal Systems, Devices and Components:
- ISI Mark Certification for Solar Flat Plate Collector for Solar Water Heating Systems - IS 12933 Part-1
- ISI Mark Certification for Solar Flat Plate Collector for Solar Water Heating Systems - IS 12933 Part-2
- ISI Mark Certification for All Glass Evacuated Tubes Solar Water Heating System - IS 16544
- ISI Mark Certification for Storage Water Tank for All Glass Evacuated Tubes Solar Water Heating Systems - IS 16542