ISI Certification (BIS) for
Storage Water Tank for All Glass Evacuated Tubes Solar Water Heating Systems IS 16542: 2016 in India
BIS certification for Storage Water Tank for All Glass Evacuated Tubes Solar Water Heating Systems under IS 16542:2016 is crucial for the product's quality, safety, and performance. It establishes that the systems meet standardized benchmarks, instilling trust among consumers and stakeholders. This certification is critical for manufacturers as it enhances brand reputation, facilitates market entry, and ensures compliance with regulatory requirements. It also supports competitive advantage by validating the system's efficiency and durability, which in turn fosters customer confidence and drives demand. It also allows manufacturers to tap into domestic and international markets, promoting sustainable energy adoption.
IS 16542:2016 comes under Scheme 1 BIS License. This regulation deals with licensing after strict testing and factory inspection. The products manufactured as per this scheme are entitled to display the ISI mark, indicating they are of the highest quality and safety. The ISI marking has extreme importance because it guarantees that the product shall be reliable, perform accordingly, and be in conformity with Indian standards. It increases brand credibility for manufacturers, streamlines acceptance in the market, and earns trust, thus fostering long-term growth and competitiveness in the solar energy sector.
BIS QCO for Storage Water Tank for All Glass Evacuated Tubes Solar Water Heating Systems IS 16542
BIS certification for the items under IS 16544:2016 is required by the Solar Water Heating Systems (Quality Control) Order, 2024. This guarantees rigorous adherence to Indian safety and quality standards. The Bureau of Indian Standards is the certification body, and it works with the Ministry of New and Renewable Energy to monitor the market to make sure compliance is maintained. Section 29(3) of the BIS Act of 2016 stipulates that noncompliance carries penalties. By guaranteeing that manufacturers provide dependable solar water heating systems, this order improves accountability and promotes quality and trust in India's renewable energy sector.
An Overview for IS 16542: 2016
In order to obtain BIS certification under IS 16542:2016 for the storage water tank of All-Glass Evacuated Tubes Solar Water Heating Systems, the product has to be tested for the following critical parameters: They are as follows:
1. Thermal Performance: Ensures that the tank can hold heat in order to optimize energy efficiency.
2. Corrosion Resistance: Validates the resistance of the tank to water-induced corrosion, thus prolonging its lifespan.
3. Leakage Tests: It ensures no water leakage under specified pressure and operational conditions.
4. Structural Integrity: It ensures the tank withstands mechanical stress without deformation or failure.
5. Insulation Quality: Tests the tank's ability to minimize heat loss and keep water temperature effectively.
Meeting these standards is critical for certification and market trust.
How to Acquire an ISI Mark Certificate for Indian Standard 16542:2016?
- Application: Applicants should submit their applications via the BIS website.
- Submission of Documents: Information is submitted, such as factory registration and quality control plans.
- Factory Inspection: BIS agents verify that the manufacturing procedure complies with regulations.
- Product Testing: Samples are tested in labs equipped with BIS panels.
- Review and Approval: If there is compliance, BIS issues a certificate following a review of the test results.
- Maintenance: Ongoing conformance is ensured by regular audits and compliance renewals.
Timeline for BIS License for IS 16542: 2016
Different BIS certification schedules are available to different producer categories in India. They are:
- Indian Manufacturers' BIS Certification (often within 30 days)
- BIS Certification for Foreign Manufacturers (Usually 180 Days)
BIS License Requirements Under IS 16542
The following are the fundamental requirements for BIS certification:
1. Register on the BIS website to apply for certification services.
2. Include information on the production unit, the producer, and the product requirements in your application.
3. Upload the necessary documents, including factory registration, raw material test reports, process flow charts, and quality control plans.
4. Pay the application fee and submit it through the BIS website for further processing.
5. Arrange for BIS personnel to visit the factory to assess the production process and confirm that it conforms with IS 16542:2016 specifications.
6. Send product samples to labs approved by BIS for analysis in order to confirm compliance with quality and performance requirements.
7. Send certification reports to BIS for testing and auditing in accordance with the Indian Standard.
8. Obtain a BIS license upon clearing. The product will be able to use the Standard Mark as a result.
9. Comply with post-license conditions, including preserving product quality, allowing for periodic audits, and routinely renewing the license.
Manufacturers can achieve BIS certification by adhering to these requirements, which enhances the product's credibility and conforms with IS 16542:2016 regulations.
BIS Certification Cost for Solar Water Heating System
The expenses related to ISI certification for Indian Standards are broken down in detail below:
S No. | Particular | Amount (INR) | Remarks
1. | Application Fee | 1000 | To be paid directly to BIS
2. | Audit Fee | 7000 | To be paid directly to BIS
3. | License Fee | 1000 | To be paid directly to BIS
4. | Sample Testing Fee | As Applicable | To be paid directly to BIS Testing charges vary from product to product and lab to lab.
5. | Minimum Advance Marking Fee | As per actual | To be paid directly to BIS (Marking fee vary as per Indian Standard.)
6. | Renewal Fee | 1000 | To be paid directly to BIS
7. | Inclusion Fee | 5000 | To be paid directly to BIS
8. | ERCS Service Fee | Please Contact info@elitasrcs.com |
Quality Testing: The most important step in the BIS certification process is product testing. It ensures that the product meets Indian standards for quality.
Testing Facility Requirement: Manufacturers are encouraged to invest in internal test laboratories equipped with the necessary equipment in order to enhance product conformance and speed up the testing process.
Pre-Visit Factory Inspection: To ensure that the product meets BIS and Indian Standards, additional fees may be incurred for a pre-visit inspection before proceeding with the real certification process.
BIS Certification Benefits of Storage Water Tank for All Glass Evacuated Tubes Solar Water Heating Systems
There are many advantages related to BIS licensing. These are a few of the benefits.
1. Quality certification: confirming the product satisfies the essential requirements of the Indian standard for structural quality would be given to customers and regulatory bodies. It would prove that this product has successfully completed rigorous testing and inspection processes.
2. Greater market acceptance: Many companies favor products with an ISI designation. The company's possibilities are increased because many government tenders for major construction projects require materials with an ISI accreditation.
3. Adherence to common regulations: The ISI certification ensures adherence to IS 16542:2016 and shields any company from penalties and legal troubles brought on by the use of inferior building materials.
4. Competitive Advantage: By differentiating companies and eventually attracting more clients, the ISI logo acts as a national symbol of excellence.
5. Customer confidence: Customers view the ISI mark as a symbol of reliability, quality, and safety, which raises the brand's profile and encourages greater customer loyalty.
6. Reduced risk and accountability: When certification lowers the possibility of structural failures or non-compliance issues, manufacturers, suppliers, and end users are less worried about responsibility.
7. Production Cost Efficiency: Manufacturing efficiency is greatly increased by IS 16542:2016, which sometimes results in less waste and more efficiency. Long-term expenses will decrease as a result.
Thus, acquiring the ISI mark for the IS 16542:2016 certificate helps promote safer structural applications, corporate growth, and customer satisfaction.
Why Choose ERCS Pvt Ltd as a BIS Consultant
Manufacturers seeking to produce a product under IS 16542:2016 with perfect compliance against Indian Standard Specifications can get end-to-end support in BIS Certification from ERCS Private Limited.
1. Document creation in compliance with BIS criteria is ensured by ERCS. Thanks to their in-depth knowledge of Indian standards and more than 100 projects of experience, manufacturers are able to achieve the required quality control requirements.
2. ERCS performs pre-visit factory inspections to identify and address any potential non-conformities. This proactive approach expedites the formal BIS inspection procedure and ensures compliance.
3. ERCS will assist manufacturers by outlining through the BIS audit what documentation is necessary and what kind of inspections should be conducted in order to improve the chances of passing.
All things considered, ERCS provides producers with the option to have products manufactured in compliance with Indian requirements.
Similar Products List of Solar Thermal Systems, Devices and Components:
- ISI Mark Certification for Solar Flat Plate Collector for Solar Water Heating Systems - IS 12933 Part-1
- ISI Mark Certification for Solar Flat Plate Collector for Solar Water Heating Systems - IS 12933 Part-2
- ISI Mark Certification for All Glass Evacuated Tubes Solar Water Heating System - IS 16544
- ISI Mark Certification for Storage Water Tank for All Glass Evacuated Tubes Solar Water Heating Systems - IS 16542