BIS Registration (CRS) for
Dimmers for Led Products – IS 60669-2-1: 2008 in India

DIMMERS FOR LED PRODUCTS  – IS 60669-2-1: 2008

LED dimmers are devices that allow users to control the brightness of LED lighting. LED lights are popular due to their energy efficiency, long lifespan, and versatility, and dimmers allow users to further customise their lighting experience.

Dimmers for LED products control the amount of power delivered to the LED light source. This is typically accomplished through the use of a technique known as pulse-width modulation (PWM), which rapidly switches the power on and off to the LED light source. The brightness of the LED can be controlled by adjusting the frequency and duration of the on/off cycles.

Dimmers for LED products come in a variety of configurations, including wall-mounted dimmer switches, remote-controlled dimmers, and smart dimmers that can be controlled via smartphone or voice assistant. Some LED lighting systems may necessitate the use of specific types of dimmers; therefore, it is critical to select a dimmer that is compatible with the LED lights being used.

Dimmers for LED products have the advantage of reducing energy consumption and extending the lifespan of LED lighting. Dimmers can help lower electricity bills and increase the longevity of LED lighting by reducing the amount of power supplied to the LED.

However, not all LED lights are dimmable, and not all dimmers are dimmable with all LED lights. It is critical to select a dimmer that is specifically designed for LED products and to ensure that the LED lights being used are compatible with the dimmer.

In July 2013, the Bureau of Indian Standards (BIS) added several products under the Compulsory Registration Scheme (CRS). Dimmers for LED products  was one of them. Under Scheme II of Schedule II, Dimmers for LED products gets BIS registered and assures that the product is of good quality and safe.

PREREQUISITES FOR OBTAINING BIS REGISTRATION -

Manufacturers - BIS license is issued to the manufacturer. importer or Trader are not eligible to get BIS license. An importer can be an Authorized Indian Representative (AIR) of a foreign manufacturer license will be issued to the Manufacturer.

Manufacturing Address – Manufacturer has to mention same address in the application as mentioned in Business License. If a manufacturer has more than one manufacturing location then separate BIS license/Registration is required for each location.

Products - Each product Category/ Indian Standard require BIS Registration number. But if the same product category includes several models or series model, one License / Registration Number can cover all Series models of the same product category or lead model.

Brands / Trademarks – For Every/Each Brand or Trademark require separate BIS Registration Number.

PROCEDURE TO OBTAIN BIS CERTIFICATION OF DIMMERS FOR LED PRODUCTS  AS PER IS 60669-2-1: 2008

1. Procedure for Domestic Manufacturer :

The BIS registration process generally includes a licensing process and a surveillance process. The steps involved in the licencing procedure are as follows:

1. Manufacturers submit online application in BIS Portal.
2. Product samples will be tested from BIS approved laboratory.
3. Submit an online/offline hardcopy of your application, together with a sample test results.
4. Verification of the report by BIS officials.
5. Issuance of Licence.

1. Procedure for Foreign Manufacturer :

Under the FMCS programme, a foreign manufacturer is given a BIS licence in accordance with the BIS Act of 2016 and the Bureau of Indian Standards (Conformity Assessment) Rules of 2018.

1. Name an Indian representative who can speak on behalf of an international manufacturer.
2. Submit online application.
3. Get sample tested from BIS approved laboratory.
4. Submit hardcopy of application and the sample test report.
5. Verification of the application by BIS Official.
6. Issuance of Licence.

DIRECTIONS FOR NOMINATION OF AUTHORIZED INDIAN REPRESENTATIVE (AIR) :

It is obligatory for foreign applicants to nominate an Authorized Indian Representative (AIR) for their operations in India to obtain a BIS Bureau of Indian Standards Certificate. Unless they have a local office in India. AIR, as the local representative, is responsible for submitting and managing the certification application and is available to answer query.

Following are the rules to be followed by foreign manufacturers while nominating an Authorized Indian Representative (AIR) :

• Case 1 : Foreign Manufacturer have liaison office or branch office in India :
  • That liaison officer will be designated as AIR officer.

• Case 2 : Foreign Manufacturer does not have liaison office or branch office in India :

1. Proprietor or registered user of the brand/trademark appearing on the article is located in India :

• The AIR will be the brand's or trademark's owner.

1. No proprietor /registered user of the brand/trademark appearing on the article, located in India :

• Other entity/Company will become the AIR.

EXPENSES INVOLVED IN OBTAINING BIS CERTIFICATE FOR DIMMERS FOR LED PRODUCTS  AS PER IS 60669-2-1: 2008 UNDER THE PRODUCT CERTIFICATION (SCHEME-II) OF BIS :

• In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.
• For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.
• Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.

DOCUMENTS REQUIRED FOR BIS REGISTRATION OF DIMMERS FOR LED PRODUCTS  AS PER IS 60669-2-1: 2008

The list of documents that BIS requires is as follows:

• BIS application form filled by proper procedure.
• Name and address documentation for the factory and the applicant.
• Third-party lab test report in accordance with Indian Standards
• If the Application is signed by an authorised signatory, an authorization letter from the CEO in that person's name is necessary.
• The Indian Agent and Nomination Form information is applicable to overseas or international manufacturers.
• Technical information on the items, including the PCB layout, the schematic diagrams, the user guide, and the critical component list
• Recognition receipt
• Undertaking and Affidavit certified with ID Proof and authorised Native Representative's signature" (in case of the foreign or overseas manufacturer)
• Official Test Results from the BIS Laboratory

• Choose a BIS recognized testing lab and an experienced Service provider.
• When you choose a lab for sample testing, keep in mind that the lab's license should be valid and not suspended.
• All documents must be signed by the manufacturer, brand owner and the Authorized Indian representative.
• In the Design Data Form (CDF) the product detail must be filled in accurately and in the Critical Components List (CCL) the product component information should be correctly.
• The test report is valid for 3 months/90 days. Before that you have to submit to BIS.
• All documents must be prepared before the sample is tested in lab.

ROLE OF ERCS PRIVATE LIMITED IN GETTING YOUR PRODUCT REGISTERED:

• For BIS registration and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards.
• ECRS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.

• Scope of work by ECRS Private Limited:

1. Ensuring the conformity of your product as per IS 60669-2-1: 2008:

ERCS Pvt. Ltd. has developed a vast network within the Electronic Industry & various BIS departments to assist for ensuring conformity of the product Dimmers for LED products  according to IS 60669-2-1: 2008.

1. Effective documentation with the awareness of the BIS guidelines:

In order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 500 projects and technically competent acquaintances in various Industries.

We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.