BIS Registration (CRS) for
Led Lighting Chains – IS 10322 (PART 5/SECTION 7): 2012 in India

­BIS REGISTRATION FOR LED LIGHTING CHAINS – IS 10322 (PART 5/SECTION 7): 2012

LED lighting chains, also known as LED string lights or LED fairy lights, are a type of decorative lighting consisting of multiple small LED bulbs arranged in a sequence and connected by a cable or wire. These lights are commonly used to add ambiance to indoor or outdoor spaces, such as homes, gardens, patios, and events.

LED lighting chains are typically low-voltage and energy-efficient, using much less electricity than traditional incandescent bulbs. They come in a variety of colors, shapes, and sizes, and some are designed for specific purposes such as holiday decorations or wedding lighting.

LED lighting chains can be powered by batteries, plug-in adapters, or solar panels, depending on the type and design of the lights. They can be strung along walls, wrapped around trees or furniture, or used to highlight specific features or areas.

When purchasing LED lighting chains, it is important to consider factors such as the length, color, and power source of the lights, as well as any safety certifications or ratings. It is also important to follow the manufacturer's instructions for installation and use to ensure safe and effective operation.

In July 2013, the Bureau of Indian Standards (BIS) added several products under the Compulsory Registration Scheme (CRS). LED Lighting Chains was one of them. Under Scheme II of Schedule II, LED Lighting Chains gets BIS registered and assures that the product is of good quality and safe.

PREREQUISITES FOR OBTAINING BIS REGISTRATION -

Manufacturers - BIS license is issued to the manufacturer. importer or Trader are not eligible to get BIS license. An importer can be an Authorized Indian Representative (AIR) of a foreign manufacturer license will be issued to the Manufacturer.

Manufacturing Address – Manufacturer has to mention same address in the application as mentioned in Business License. If a manufacturer has more than one manufacturing location then separate BIS license/Registration is required for each location.

Products - Each product Category/ Indian Standard require BIS Registration number. But if the same product category includes several models or series model, one License / Registration Number can cover all Series models of the same product category or lead model.

Brands / Trademarks – For Every/Each Brand or Trademark require separate BIS Registration Number.

PROCEDURE TO OBTAIN BIS CERTIFICATION OF LED LIGHTING CHAINS AS PER IS 10322 (Part 5/Section 7): 2012

1. Procedure for Domestic Manufacturer :

The BIS registration process generally includes a licensing process and a surveillance process. The following steps are involved under the licensing process:

1. Manufacturers submit online application in BIS Portal.
2. Product samples will be tested from BIS approved laboratory.
3. Submit online/offline hardcopy of application including Sample test report.
4. Verification of the report by BIS officials.
5. Issuance of Licence.

1. Procedure for Foreign Manufacturer :

FMCS is a scheme under which BIS licence is granted to a foreign manufacturer in accordance with the BIS Act, 2016 and Bureau on Indian Standards (Conformity Assessment) Regulations, 2018.

1. Nominate Indian Representative who can represent foreign manufacturer.
2. Submit online application.
3. Get sample tested from BIS approved laboratory.
4. Submit hardcopy of application and the sample test report.
5. Verification of the application by BIS Official.
6. Issuance of Licence.

DIRECTIONS FOR NOMINATION OF AUTHORIZED INDIAN REPRESENTATIVE (AIR) :

It is obligatory for foreign applicants to nominate an Authorized Indian Representative (AIR) for their operations in India to obtain a BIS Bureau of Indian Standards Certificate. In case they don't have a branch office in India. AIR, as the local representative, is responsible for submitting and managing the certification application and is available to answer query.

Following are the rules to be followed by foreign manufacturers while nominating an Authorized Indian Representative (AIR) :

• Case 1 : Foreign Manufacturer have liaison office or branch office in India :
  • That liaison officer will be designated as AIR officer.

• Case 2 : Foreign Manufacturer does not have liaison office or branch office in India :

1. Proprietor or registered user of the brand/trademark appearing on the article is located in India :

• The owner of the brand/trademark will become AIR.

1. No proprietor /registered user of the brand/trademark appearing on the article, located in India :

• Other entity/Company will become the AIR.

EXPENSES INVOLVED IN OBTAINING BIS CERTIFICATE FOR LED LIGHTING CHAINS AS PER IS 10322 (Part 5/Section 7): 2012 UNDER THE PRODUCT CERTIFICATION (SCHEME-II) OF BIS :

• In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.
• For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.
• Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.

DOCUMENTS REQUIRED FOR BIS REGISTRATION of LED LIGHTING CHAINS- IS 616:2010

BIS demands a number of documents, as shown below:

• BIS application form filled by proper procedure.
• Name and Address proof of the applicant and the factory. 
• 3rd party laboratory test report as per the Indian Standards
• If an authorized signatory signs the Application, an authorization letter from the CEO in the name of the authorized signatory
• In the case of Overseas or foreign manufacturers, the Indian Agent and Nomination Form details.
• Technical details of products, such as PCB Layout, Schematic Diagrams, User Manual and Critical Components List
• Acknowledgement receipt 
• Undertaking and Affidavit attested with ID Proof and signature of the approved Indian Representative (in case of the foreign or overseas manufacturer)
• Original Test Reports from BIS Laboratory

• Choose a BIS recognized testing lab and an experienced Service provider.
• When you choose a lab for sample testing, keep in mind that the lab's license should be valid and not suspended.
• All documents must be signed by the manufacturer, brand owner and the Authorized Indian representative.
• In the Design Data Form (CDF) the product detail must be filled in accurately and in the Critical Components List (CCL) the product component information should be correctly.
• The test report is valid for 3 months/90 days. Before that you have to submit to BIS.
• All documents must be prepared before the sample is tested in lab.

ROLE OF ERCS PRIVATE LIMITED IN GETTING YOUR PRODUCT REGISTERED:

• For BIS registration and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards.
• ECRS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.

• Scope of work by ECRS Private Limited:

1. Ensuring the conformity of your product as per IS 10322 (Part 5/Section 7): 2012:

ERCS Pvt. Ltd. has developed a vast network within the Luminaires Industry & various BIS departments to assist for ensuring conformity of the product LED Lighting Chainsaccording to IS 10322 (Part 5/Section 7): 2012.

1. Effective documentation with the awareness of the BIS guidelines:

In order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 500 projects and technically competent acquaintances in various Industries.

We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.