ISI Certification (BIS) for
Geosynthetics Reinforced Hdpe Membrane for Effluents and Chemical Resistance Lining IS 17374 in India
A geomembrane is a synthetic membrane liner or barrier with a very low permeability that is used in conjunction with any geotechnical engineering material to regulate fluid (or gas) migration in a human-made project, structure, or system.
Introduction to Indian Standard IS 17374:2020; Geosynthetics - Reinforced HDPE membrane for effluents and chemical resistance lining
· IS 17374:2020 cover Geosynthetics - Reinforced HDPE membrane for effluents and chemical resistance lining.
· This standard prescribes requirements for reinforced high density polyethylene (HDPE) membrane laminated with low density polyethylene (LDPE) or suitable combination of low density polyethylene (LDPE) and linear low density polyethylene (LLDPE) for use as proper disposal of domestic and industrial effluents, solid wastes sights and sewage pond, in oil exploration industry, dairy industry, sugar industry, pharmaceutical industry, distillery, agrochemicals, and mining etc.
· The tests used to characterize the reinforced HDPE membrane are intended to ensure good workmanship and quality and are not necessarily adequate for design purposes in view of the importance of environmental factors and specific performance objectives. Other tests are necessary to establish chemical resistance and durability under the condition of particular application as per Annex H.
· IS 17374:2020 specifies the quality parameters or characteristics of the Geosynthetics - Reinforced HDPE membrane for effluents and chemical resistance lining as follows :
(i) Material
(ii) Manufacture
(iii) Workmanship
(iv) Joints/ Seams
(v) Thickness
(vi) Mass
(vii) Dimensions
(viii) Carbon Black Content
(ix) Strain at Maximum Load
(x) Tear Resistance
(xi) Puncture Resistance
(xii) Bursting Strength
1. Mandate for ISI Mark Certification of Geosynthetics - Reinforced HDPE membrane for effluents and chemical resistance lining (IS 17374:2020)
· In exercise of the powers conferred by sub-sections (1) and (2) of section 16 read with section 17 and sub-section (3) of section 25 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government is of the opinion that it is necessary so to do in the public interest and after consulting the Bureau of Indian Standards, hereby makes the following Order, namely
Geo Textiles (Quality Control) Order, 2022.
· As per the Geo Textiles (Quality control) order, all the manufacturers of Geosynthetics - Reinforced HDPE membrane for effluents and chemical resistance lining are obligated to obtain ISI Mark Certification.
2. Types of Geosynthetics - Reinforced HDPE membrane for effluents and chemical resistance lining covered under IS 17374:2020
3. Procedure to obtain BIS Certification of Geosynthetics - Reinforced HDPE membrane for effluents and chemical resistance lining to use ISI mark as per IS 17374:2020
· For Indian Manufacturers (Standard Timeframe – 30 days)
· For Foreign Manufacturers (Standard Timeframe – 180 days)
· Requisites to get the BIS license for Geosynthetics - Reinforced HDPE membrane for effluents and chemical resistance lining
· Conformity of Raw Material as per IS 17374:2020
· In-house testing laboratory for mandatory tests
· Competent Quality Control Personnel
· Adherence to the BIS guidelines for Geosynthetics - Reinforced HDPE membrane for effluents and chemical resistance lining as per Indian standard IS 17374:2020
· There are 3 major categories of document required to get the BIS license:
c. Quality Control Personnel Details
4. Expenses involved in obtaining BIS certificate for Geosynthetics - Reinforced HDPE membrane for effluents and chemical resistance lining as per IS 17374:2020 under the Product Certification (Scheme-I) of BIS :
· In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.
· For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.
· Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.
5. Role of ERCS Private Limited in getting your product certified :
· To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards.
· ECRS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.
· Scope of work by ECRS Private Limited:
a. Ensuring the conformity of your product as per IS 17374:2020:
ERCS Pvt. Ltd. has developed a vast network within the Geotextile Industry & various BIS departments to assist for ensuring conformity of the product Geosynthetics - Reinforced HDPE membrane for effluents and chemical resistance lining according to according to IS 17374:2020.
b. Effective documentation with the awareness of the BIS guidelines:
In order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 150 projects and technically competent acquaintances in various Industries.
We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.
c. A pre-visit can be paid at your factory premises:
In the process of getting BIS certification, the officer from BIS authority visits the factory for inspection. In order to get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted so as to remove the elements of fallibility.
d. Assistance for BIS audits:
We will explain the whole procedure of conducting a BIS inspection and make you aware of the things which need to be prepared and readily available at the time of inspection.
2. Benefits of getting ISI Mark for Geosynthetics - Reinforced HDPE membrane for effluents and chemical resistance lining to sell in Indian Market with our help :
§ The term “ISI mark" means, that a certain product conforms to the quality standards set up by the government.
§ It is compulsory for Geosynthetics - Reinforced HDPE membrane for effluents and chemical resistance lining to obtain the ISI Mark and the violators are penalized with the material seize and a significant sum as fine.
§ Getting certification improves the probability of your product to survive and compete in the market.
§ Customers have the tendency of buying ISI certified products as it ensured safety and standard quality. Hence, with the certified products you can win the confidence and trust of the buyer.
§ With the word of mouth of such client list, you can establish your credibility in the market.
§ Hence with the renowned brand, you can raise the standard and benchmark the market value of the product.