ISI Certification (BIS) for
Pre-Laminated Particle Boards IS 12823 in India

ISI Certification (BIS) For PRE-LAMINATED PARTICLE BOARDS IS 12823

1. Introduction to Indian Standard IS 12823; Prelaminated Particle Boards from Wood and Other Lignocellulosic Material

• IS 12823 cover Prelaminated Particle Boards from Wood and Other Lignocellulosic Material. This standard specifies the manufacturing, chemical and physical requirements and testing of Prelaminated Particle Boards from Wood and Other Lignocellulosic Material.
• IS 12823 specifies the quality parameters or characteristics of the Prelaminated Particle Boards from Wood and Other Lignocellulosic Material as follows

1. Density
2. Moisture Content
3. Swelling in Water Test
4. Tensile Strength Perpendicular to Surface
5. Dimensions and Tolerances
6. Screw Withdrawal Test
7. Abrasion Resistance
8. Crack Resistance
9. Resistance to Stain
10. Modules of rapture and Elasticity

2. Mandate for ISI Mark Certification of Prelaminated Particle Boards from Wood and Other Lignocellulosic Material (IS 12823) :

• Under section 14 of Bureau of Indian Standards Act, 1986 (63 of 1986), the Ministry of Commerce and Industry, Department for Promotion of Industry and Internal Trade after consulting the Bureau of Indian Standards has issued the Quality control order.
• As per the Quality control order, all the manufacturers of Prelaminated Particle Boards from Wood and Other Lignocellulosic Material are obligated to obtain ISI Mark Certification.

3. Types of Prelaminated Particle Boards from Wood and Other Lignocellulosic Material covered under IS

4. Procedure to obtain BIS Certification of Prelaminated Particle Boards from Wood and Other Lignocellulosic Material ISI mark as per IS 12823

• For Indian Manufacturers (Standard Timeframe – 30 days) click here
• For Foreign Manufacturers (Standard Timeframe – 180 days)click here

5. Requisites to get the BIS license for Prelaminated Particle Boards from Wood and Other Lignocellulosic Material

• Conformity of Raw Material as per IS 12823
• In-house testing laboratory for mandatory tests
• Competent Quality Control Personnel
• Adherence to the BIS guidelines for Grey iron castings as per Indian standard IS 12823
• There are 3 major categories of document required to get the BIS license:

1. Administrative Details
2. Technical Details
3. Quality Control Personnel Details
4. Commercial Details

6. Expenses involved in obtaining BIS certificate for Prelaminated Particle Boards from Wood and Other Lignocellulosic Material as per IS 12823 under the Product Certification (Scheme-I) of BIS:

• In the certification process, product testing is the most important stage as it determines whether the quality of the product meets Indian standards.
• For the same purpose, investments in testing facilities are required to install test equipment for internal factory test laboratories.
• Apart from charges mentioned above in the table, we may ask you to pay/reimbursement for a Pre-Visit at your Factory Premises to ensure the conformity of your product as per the relevant Indian Standard & BIS guidelines for its BIS certification.

7. Role of ERCS Private Limited in getting your product certified:

• To get BIS certification and produce a standard quality product, the manufacturer must ensure that their product must follow the specified Indian Standard Specifications (ISS) which we directly interpret to you from the BIS officials as per the Indian Standards.
• ECRS Private Limited will be your friend, philosopher and guide in the whole process of getting your product certified by the concerned authorities/ departments.
• Scope of work by ECRS Private Limited:

Ensuring the conformity of your product as per IS 12823:

ERCS Pvt. Ltd. has developed a vast network within the Iron Industry & various BIS departments to assist for ensuring conformity of the product Malleable cast iron pipe fittings according to according to IS 12823.

Effective documentation with the awareness of the BIS guidelines:

order to facilitate the manufacturing industry in obtaining BIS certifications, guidelines have been developed. Our team has the experience of completing over 150 projects and technically competent acquaintances in various Industries. We are familiar with the Indian Standard Specifications & BIS guidelines and deliver the most suitable interpretation to the Quality Control Personnel so we can do a reliable and effective documentation of your product in accordance with the BIS guidelines.

A pre-visit can be paid at your factory premises:

In the process of getting BIS certification, the officer from BIS authority visits the factory for inspection. In order to get good results, the BIS inspection should go smoothly without any Non-Conformity. By keeping this goal in mind, our team will organize a pre-visit to your factory premises so that required changes can be adapted so as to remove the elements of fallibility.

Assistance for BIS audits:

We will explain the whole procedure of conducting a BIS inspection and make you aware of the things which need to be prepared and readily available at the time of inspection.

Benefits of getting ISI Mark for Polypropylene (PP) Materials for Moulding and Extrusion to sell in Indian Market with our help

• The term “ISI mark" means, that a certain product conforms to the quality standards set up by the government.
• It is compulsory for Polypropylene (PP) Materials for Moulding and Extrusion to obtain the ISI Mark and the violators are penalized with the material seize and a significant sum as fine.
• Getting certification improves the probability of your product to survive and compete in the market.
• Customers have the tendency of buying ISI certified products as it ensured safety and standard quality. Hence, with the certified products you can win the confidence and trust of the buyer.
• With the word of mouth of such client list, you can establish your credibility in the market.
• Hence with the renowned brand, you can raise the standard and benchmark the market value of the product.