BIS (ISI) Certification for Steel
One of the most frequently used commodities in India is steel, which is utilized in a variety of industries including manufacturing, transportation, and construction. As a consequence, it is crucial to guarantee the quality and safety of steel goods, which is where BIS (ISI) certification comes into play.
BIS Certification (ISI Mark) for Steel and Steel Products
Similar to the various segments of the major industries, Steel and Steel products are subjected to regulatory compliance under the ambit of the Indian Government by a wing so-called the Ministry of Steel. It publishes a Steel Quality Control Order-2020 order which depicts the regulatory compliance requirement for Steel and Steel products enforcing all the stakeholders to comply with the Indian Standards Specifications and simultaneously get an approval mark like the ISI mark by the National Standardization body of India which is known as the BUREAU OF INDIAN STANDARDS (BIS). The Ministry of Consumer Affairs, Food, and Public Distribution currently oversees BIS, which was once India's largest Third-Party Inspection organization. BIS have different Schemes to approve the various product categories. Steel and Steel products come under the ambit of Scheme-I (a.k.a. Product Certification Scheme) of BIS (Conformity Assessment Rules and Regulations 2018, Schedule-II enacted by the BIS Act 2016).
There are various kinds of Steel and Steel products or their Indian Standards mandatory to carry the ISI mark to signify their compliance with their relevant Indian Standards to ensure the quality of the product and provide traceability directly to the manufacturer of the particular product.
Depending upon the type, form, and application of steel, a plethora of Indian Standards are formulated with the help of all the stakeholders and the pioneer of the relevant Steel Industries. For example, IS 6911 covers a huge variety and grades of Stainless Steel in the form of Sheets, Plates, and Strips Coil commonly used for heat-resisting applications while some similar grades are covered under IS 5522 and IS 15997 for the manufacture of Utensils. You can also check the list of Steel and Steel products mandatory for BIS certification on the official website of BIS.
What Does BIS (ISI) Certification Mean for Indian Steel?
Under the provisions of the Bureau of Indian Standards Act, the Bureau of Indian Standards (BIS) is a national standards organisation. Obtaining BIS (ISI) certification from BIS certifies a product as meeting the required requirements for quality, safety, and dependability. In India, structural steel, reinforcing steel bars (often referred to as TMT bars), steel plates, and steel pipes all need this certification.
How Crucial is BIS (ISI) Certification for Steel Products?
Providing for the safety and dependability of steel goods is the main goal of BIS (ISI) certification. Steel is employed in crucial areas including building, infrastructure, and transportation where a component's failure might have dire repercussions. Consumers and regulatory bodies may be certain that the steel goods they are purchasing are of the highest quality and adhere to the established requirements thanks to BIS (ISI) certification.
Advantages of Steel Product BIS (ISI) Certification
These are some of the many advantages of BIS (ISI) certification for steel products:
Quality Assurance: BIS (ISI) certification offers customers and regulatory bodies the reassurance that the steel product satisfies the established criteria of safety, dependability, and quality.
Compliance with Regulations: Many steel products in India need BIS (ISI) certification. Manufacturers may comply with legal standards and stay out of trouble by being certified.
Competitive Advantage: BIS (ISI) certification gives producers a competitive edge since it proves that their goods are of the highest calibre.
Improved Customer Confidence: BIS (ISI) certification promotes consumer faith in the reliability and security of steel goods, boosting sales and fostering stronger relationships with consumers.
To sum up, BIS (ISI) certification is necessary to guarantee the dependability and safety of steel goods in India. There are various processes in the certification process, including testing, auditing, and awarding of certification. The BIS (ISI) certification offers a number of advantages, including quality assurance, regulatory compliance, a competitive edge, and greater customer trust. To guarantee that their goods meet the highest requirements for quality and safety, steel product manufacturers should receive BIS (ISI) certification.
Basic Criteria to Get BIS Certificate
Please note the below points-
- Applicant has to find the applicable Indian standard (IS) before filing the application.
- BIS issue the ISI Certificate only to the manufacturing unit (Where a finished product is manufactured)
- BIS does not issue the license to the importer/distributor/retailer.
- If the applicants have multiple factories in different locations, then they have to file separate applications for each factory address.
- Manufacturer has to show the process chart of manufacturing from receiving the raw material to final packaging. If some part of manufacturing is outsourced, BIS clearance must be required.
- Applicant (Manufacturer) has to ensure that they have all required testing equipment and qualified Quality control personal (QCI) to perform the according to the applicable Indian standard and SIT.
Mandatory Product List for BIS (ISI) Certification for Steel
Simplified Procedure
Please note the steps involved under this procedure –
Step 1: Applicant has to find the relevant Indian Standard and setting the In-house lab for testing of the product.
Step 2: Prepare the required documents along with test report (From the BIS Recognized lab) and submit the application in the BIS portal.
Step 3: BIS officer will conduct the factory Inspection.
Step 4: During Factory Inspection BIS officer sealed the sample and that sample further sent to the testing on BIS recognized lab.
Step 5: If any Non conformity issue is raised by BIS the same has to be rectified and complied by as instructed by BIS. If any
Step 6: ISI Certificate is granted by the Bureau of Indian Standard (BIS)
Duration – Approx 25 to 30 working days after submission of application in the BIS portal.
Project Time line Chart for ISI Certification of domestic manufacturer (Simplified procedure)
Normal Procedure
Please note the steps involved under this procedure –
Step 1: Applicant has to find the relevant Indian Standard and setting the In-house lab for testing of the product.
Step 2: Prepare the required documents and submit the application in the BIS portal.
Step 3: BIS officer will conduct the factory Inspection.
Step 4: During Factory Inspection BIS officer sealed the sample and that sample further sent to the testing on BIS recognized lab.
Step 5: If any Non conformity issue is raised by BIS the same has to be rectified and complied by as instructed by BIS. If any
Step 6: When the product passes all the test parameters then Bureau of Indian Standard (BIS) issue the ISI Certificate.
Duration – Approx 60 to 90 working days after submitting the application in BIS portal.
BIS fee for BIS (ISI) Certification
Required Documents
- Application form (Click here)
- Factory registration (KYC) Documents
- Manufacturing process flow chart.
- Required testing equipment list with valid calibration (In-house Testing Facilities)
- Raw material details and their test certificates
- Authorized signatory and QCI details
- Factory test report
- Plant layout and other related documents.
Frequently asked questions (FAQs)
BIS accepts application for product certification in online mode only. Please contact us on info@elitasrcs.com for any type of assistance for obtaining the BIS Certificate.
Separate application for each product / ISS is required to be submitted even for same factory / Manufacturing location.
Separate application for each product / ISS is required to be submitted even for same factory unit.
Separate application for each product / ISS is required to be submitted even for same factory unit.
Test report will be valid up to 90 days from the date of issue of test report.
After grant of licence to the manufacturer, BIS can do surprise factory surveillance inspections through visit to the factory by certification officers of BIS or by personnel of the Agents appointed by BIS as per Rule 33 of BIS Rules, 2018. BIS will verify that manufacturer continues to maintain the manufacturing infrastructure, process controls, quality control and testing formalities and conformity of the product to the applicable Indian Standard. Testing of the product samples in factory is also witnessed during the inspection. Sample of ISI marked product is also drawn from the factory for verification of conformity to relevant ISS through third party laboratory testing. BIS also carries out market surveillance through purchase of samples of ISI marked product for verification of conformity of the product to relevant ISS through third party laboratory testing of the product.
BIS licensee is required to inform BIS that they are shifting the factory location to a new address with relevant documents for the new premises similar to the documents submitted at the time of applying to BIS for grant of licence. The licensee can suspend the use of the Standard Mark under intimation to the Bureau on relocation of factory location to new location. The revocation of suspension may be done by the Bureau after verification of the old premises and verification of production process at new premises as per provision of paragraph 11 (3) & (4) of scheme I of BIS (Conformity Assessment) Regulations, 2018.
Share:
Need Expert Advice?
Feel Free to Connect with Us
Prompt reply within hours
Continued support
Experience Consultants at ERCS are ready to assist you at every step of compliance so as to provide you the best services in India. Get complete information about the certification that your product need to enter in Indian market and build a good consumer base.